Roberts Gorden HP 460 V 3, HP 208 V 1, HP 208 V 3, HP 230 V 1, HP 230 V 3 Roberts-Gordon LLC

TABLE OF CONTENTS
SECTION 1: Introduction		1
1.1 Safety		1
1.2 What is a ROBERTS GORDON® System Control?		1
1.3 Electrical Requirements		1
1.4 Check Installation Materials		1
SECTION 2: Specifications		3
2.1	Material Specifications	3
2.2	Electrical Specifications	3
2.3	Pump Specifications	3
2.4	Burner Electrical Ratings	4
2.5	Outside Air Supply Blower Electrical Ratings	4
2.6	Indicator Lights	4
2.7	Terminal Block Guide	4
SECTION 3: Installation		5
3.1	Preparation	5
3.2	Installing the System Control Panel	5
3.3	Select the External Wiring Diagram for the
	Installation	5
3.4	System Configuration	6
SECTION 4: Typical External Wiring Diagrams		7
4.1	EP-100 or EP-201 120 V 1 Ø Pump External
	Wiring Diagram	7
4.2	EP-201 or EP-301 230 V 1 Ø External
	Wiring Diagram	8
4.3	EP-203 or EP-303 208 - 230 V (or 460 V) 3 Ø Pump
	External Wiring Diagram	9
4.4	Outside Air Blower External Wiring Diagram	10
SECTION 5: Troubleshooting		12
5.1	Sequence of Operation	12
SECTION 6: Replacement Parts		14
6.1	Replacement Parts Instructions	15
SECTION 7: The ROBERTS GORDON® System Control
	Warranty	17

© 2009 Roberts-Gordon LLC

All rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping or information storage and retrieval systems - without the written permission of Roberts-Gordon LLC.

Printed in U.S.A.