Basic Operation
To Reset the Notebook
Occasionally, you may find that Windows or the notebook has stopped responding and will not let you turn off the notebook. If this happens, try the following procedures in this order:
■If possible, shut down Windows. Press ctrl+alt+del, then select Shut Down > Restart.
■Press the power button for at least 4 seconds until the display shuts down. Unsaved data will be lost. Press the power button again to restart.
■Insert the tip of a paper clip into the reset button on the bottom of the notebook, then press the power button to restart.
To Change the Boot Device
The notebook normally boots from its internal hard drive. You can also boot the notebook from a diskette drive, a
1.Select Start > Turn Off Computer > Restart.
2.When the logo screen appears, press esc to display the Boot menu.
3.Use the arrow keys to select the boot device, then press enter.
If you want to boot from a specific device whenever it is present, change the boot order using the BIOS Setup utility. See “Configuring Your Notebook” in the “Troubleshooting” chapter in this guide.
HP Manual Title |