HP 433, 435 manual Recording video clips

Recording video clips

1	Frame the subject for your
	video in the viewfinder.
2	Press and release the Video
	button to start recording
	video. Both the red viewfinder
	light and the Video/Self-Timer light will turn on solid. A
	video	icon and a Time Remaining counter appear at the

top of the Image Display.

NOTE If you have the Self-Timer mode on (see Using self-timer mode on page 28), the camera will start recording 10

seconds after you press the button.

3To stop recording, press the button again.

The length of a video clip is limited only by the amount of available memory. The camera calculates the time remaining (mm:ss) counter based on the amount of available memory (internal or memory card). The video ends when time remaining reaches zero or the button is pressed again.

After recording has stopped, the last frame of the video clip remains on the Image Display for instant review. During this time, the video clip is saved to memory unless you choose to delete it by pressing the OK button.

NOTE Audio is automatically recorded with video clips.

22 hp photosmart 430 series user’s manual