HP 435, 433 Changing capture modes, Following table describes these different icons, Self-Timer

Changing capture modes

The Mode button on the top of the camera sets the camera to one of three different capture modes. Each time you press this button, the camera changes to the next capture mode. The sequence for the different settings is: Self-Timer, Action, Normal, and then repeat.

NOTE These settings do not have any effect on recording video clips unless specifically noted otherwise.

Each time you change the capture mode, an icon representing that capture mode appears on the Image Display. The

following table describes these different icons.

Icon	Setting	Description
	Self-Timer	Camera waits 10 seconds after the Video
		button or Shutter button is pressed to take a
		video clip or a picture. See Using self-timer
		mode on page 28.
	Action	Camera biases toward faster shutter speeds
		and higher ISO speeds to stop action.
None	Normal	Camera automatically selects aperture and
		shutter speed. This is the default setting
		when the camera is first turned on.

Chapter 2: Taking pictures and recording video clips 27