HP 435, 433 manual My image is, Blurry

Problem	Possible cause	Solution
The camera	The camera is	Wait a few seconds for the
does not take	still saving the	camera to finish processing the
a picture	last picture you	image, and then press the Shutter
when I press	took.	button.
the Shutter
	Images in the	Format the memory. (See
button.
	memory	page 40)
(continued)
	(internal or
	card) may be
	corrupted.
My image is	Your subject	Do not try to get closer than the
blurry.	was too close to	camera’s minimum focus range
	the camera	(See Appendix B: Specifications
	lens.	on page 95)
	You moved the	Hold the camera steady as you
	camera while	press the Shutter button or use a
	you took the	tripod.
	picture.
	The light is low	In dim light, the camera requires
	and the flash is	a longer exposure. Use a tripod
	set to Flash Off.	to hold the camera steady,
		improve lighting conditions, or set
		the flash to Flash On (see
		page 25).

Chapter 7: Troubleshooting and support 69