HP 433 Using self-timer mode, Secure the camera to a tripod or set it on a stable surface, Still

Using self-timer mode

1Secure the camera to a tripod or set it on a stable surface.

2Press the Mode button on the top of the camera until the Self-Timer icon appears on the Image Display.

3Frame the subject in the viewfinder.

4The next steps depend on whether you are capturing a still picture or a video clip.

When	Procedure
capturing:
Still	1	Press the Shutter button down. A 10-second
picture		countdown appears on the Image Display.
	You cannot record audio when using the Self-Timer,
	but you can add an audio clip to the image later (see
	Recording and deleting audio clips on page 41).
Video clip	1	To start recording, press the Video		button and
		then release it. A 10-second countdown appears
	2	on the Image Display.
		To stop recording the video clip, press the
		Video	button again.

NOTE The Video/Self-Timer light on the front of the camera blinks before the camera takes the picture or video clip.

28 hp photosmart 430 series user’s manual