100, Some cases, STIT-4X8MSZN | Toshiba RAS-B10SKVP-E, RAS-10SAVP-E

No.	Part name		Procedure	Remarks
ƒ	Inverter	1)	Perform work of item 1 in •.	Inverter cover
	assembly	2)	Remove screw (ST1TØ4 × 8L 2 pcs.) of the	Inverter cover
		2)	Remove screw (ST1TØ4 × 8L 2 pcs.) of the	P. C. board
			upper part of the front cabinet.	P. C. board
			upper part of the front cabinet.	(Soldered surface)
				(Soldered surface)

• If removing the inverter cover in this condition, P.C. board can be checked.

• If there is no space above the unit, perform work of 1 in ‚.

Be careful to check the inverter because high-voltage circuit is incorporated in it.

3) Perform discharging by connecting ,	Discharging position	Plug of
3) Perform discharging by connecting ,	Discharging position	soldering
polarity by discharging resistance (approx.	(Discharging period	iron
polarity by discharging resistance (approx.	10 seconds or more)	iron
100Ω40W) or plug of soldering iron to ,	10 seconds or more)
100Ω40W) or plug of soldering iron to ,
terminals a of the C14 (printed “CAUTION
HIGH VOLTAGE” is attached.) electrolytic
capacitor (760µF) on P.C. board.
Be careful to discharge the capacitor
because the electrolytic capacitor
cannot naturally discharge and voltage
remains according to trouble type in	A screw
some cases.	A screw	Terminal block
some cases.	(STIT-4X8MSZN)	Terminal block

NOTE

This capacitor is one with mass capacity. Therefore, it is dangerous that a large spark generates if short-circuiting between , polarity with screwdriver, etc. for discharging.

4)	Remove screw (ST1TØ4 × 8L 2 pcs.) fixing
	the main body and the inverter box.	Put the compressor	Put each leads
5)	Remove the front cabinet by performing step	leads through	through the hole
5)	Remove the front cabinet by performing step	the hole
	1 in ‚, and remove the fixing screws	the hole
	1 in ‚, and remove the fixing screws
	(ST1TØ4 × 8L) for securing the main body
	and inverter box.	The connector is one
6)	Remove various lead wires from the holder	with lock, so remove
	at upper part of the inverter box.	it while pushing the
7)	Pull the inverter box upward.	part indicated by
7)	Pull the inverter box upward.	an arrow.
8)	Disconnect connectors of various lead wires.	an arrow.
8)	Disconnect connectors of various lead wires.

Requirement

As each connector has a lock mecha- nism, avoid to remove the connector by holding the lead wire, but by holding the connector.

Be sure to remove the connector by holding the connector, not by pulling the lead wire.

– 100 –

RAS-10SAVP-E, RAS-B10SKVP-E, RAS-B13SKVP-E specifications

Toshiba has established itself as a leader in the HVAC market, known for its innovative technologies and reliable performance. Among its range of air conditioning units, the Toshiba RAS-B10SKVP-E, RAS-10SAVP-E, and RAS-B13SKVP-E models stand out for their efficiency and advanced features.

The Toshiba RAS-B10SKVP-E is designed for optimal cooling and heating efficiency, making it an ideal choice for small to medium-sized rooms. One of its main features is the Super Hi-M-PAM inverter technology, which enhances energy savings by continuously adjusting the compressor speed to match the cooling demand. This results in lower energy consumption while maintaining a stable temperature. Additionally, the unit boasts a 4-in-1 operation mode that allows users to select cooling, heating, dehumidification, or ventilating modes, ensuring maximum comfort at all times.

Similarly, the RAS-10SAVP-E model incorporates advanced features such as an eco-friendly refrigerant, R32, which has a lower Global Warming Potential (GWP) compared to traditional refrigerants. This model is equipped with a high-efficiency filter that captures dust and allergens, ensuring cleaner air quality. The sleek design allows for easy integration into various interior styles, while its quiet operation makes it a preferred choice for residential environments.

The RAS-B13SKVP-E model takes performance to the next level with a robust cooling capacity, designed for larger spaces. This model utilizes Toshiba's unique DC Hybrid Inverter technology, which not only enhances cooling efficiency but also facilitates faster temperature control. A notable characteristic of this unit is its wide-angle air distribution system, which allows for even airflow throughout the room, enhancing comfort.

In addition to these features, all three models are equipped with smart controls that enable users to operate their air conditioning systems remotely via mobile devices. This connectivity adds convenience and ensures that users can manage their indoor climate at their fingertips. They also come with user-friendly interfaces and programmable timers, allowing for personalized comfort settings.

In conclusion, the Toshiba RAS-B10SKVP-E, RAS-10SAVP-E, and RAS-B13SKVP-E air conditioning units combine energy efficiency, innovative technology, and user-friendly features to deliver exceptional indoor comfort. With their advanced technologies, these models are ideal choices for anyone seeking reliable and effective climate control solutions.

Part name

Inverter cover

some cases.

(STIT-4X8MSZN)

Requirement

– 100 –

RAS-10SAVP-E, RAS-B10SKVP-E, RAS-B13SKVP-E specifications