Installation Location, Remote controller

10-3. Indoor Unit

10-3-1. Installation Location

•A place which provides enough spaces around the indoor unit as shown in the diagram.

•A place where there are no obstacles near the air inlet and outlet.

•A place which allows easy installation of the piping to the outdoor unit.

•A place which allows the front panel to be opened.

CAUTION

•The indoor unit shall be installed so that the top of the indoor unit is positioned at least 2m in height.

Also, avoid putting anything on the top of the indoor unit.

•Direct sunlight on the indoor unit wireless receiver should be avoided.

•The microprocessor in the indoor unit should not be too close to r-f sources.

(For details, see the owner's manual.)

Remote controller

•Should be placed where there are no obstacles, such as curtains, that may block the signal.

•Do not install the remote controller in a place exposed to direct sunlight or close to a heating source, such as a stove.

•Keep the remote controller at least 1 m away from the nearest TV set or stereo equipment.

(This is necessary to prevent image disturbances or noise interference.)

•The location of the remote controller should be determined as shown below.

(Side view)	(Top view)
unit	Indoor unit
Indoor

Reception		Reception
Reception	Remote	range
range	controller	Remote controller
		Remote controller

*: Axial distance

10-3-2. Drilling and Mounting Installation Plate

Drilling

When install the refrigerant pipes from the rear.

	The center of the
	pipe hole
	Pipe
	hole
	65
42 mm	mm
42 mm

Fig. 10-3-2

1.Decide the installation plate mounting position on the wall.

2.Mark the corresponding pipe hole wall positions

according to the positioning marks ( ð ) on the installation plate.

3.Drill the pipe holes (Ø65 mm) slightly slanted downward to the outside.

NOTE :

•When drilling into a wall that contains a metal lath, wire lath or metal plate, be sure to use a pipe hole brim ring sold separately.

Mounting the installation plate

Anchor bolt holes

25	mm

91	mm

Pipe hole

	Pipe hole
Indoor unit
6 Mounting screw	1 Installation plate

Fig. 10-3-1

Fig. 10-3-3

– 58 –

RAS-10SAVP-E, RAS-B10SKVP-E, RAS-B13SKVP-E specifications

Toshiba has established itself as a leader in the HVAC market, known for its innovative technologies and reliable performance. Among its range of air conditioning units, the Toshiba RAS-B10SKVP-E, RAS-10SAVP-E, and RAS-B13SKVP-E models stand out for their efficiency and advanced features.

The Toshiba RAS-B10SKVP-E is designed for optimal cooling and heating efficiency, making it an ideal choice for small to medium-sized rooms. One of its main features is the Super Hi-M-PAM inverter technology, which enhances energy savings by continuously adjusting the compressor speed to match the cooling demand. This results in lower energy consumption while maintaining a stable temperature. Additionally, the unit boasts a 4-in-1 operation mode that allows users to select cooling, heating, dehumidification, or ventilating modes, ensuring maximum comfort at all times.

Similarly, the RAS-10SAVP-E model incorporates advanced features such as an eco-friendly refrigerant, R32, which has a lower Global Warming Potential (GWP) compared to traditional refrigerants. This model is equipped with a high-efficiency filter that captures dust and allergens, ensuring cleaner air quality. The sleek design allows for easy integration into various interior styles, while its quiet operation makes it a preferred choice for residential environments.

The RAS-B13SKVP-E model takes performance to the next level with a robust cooling capacity, designed for larger spaces. This model utilizes Toshiba's unique DC Hybrid Inverter technology, which not only enhances cooling efficiency but also facilitates faster temperature control. A notable characteristic of this unit is its wide-angle air distribution system, which allows for even airflow throughout the room, enhancing comfort.

In addition to these features, all three models are equipped with smart controls that enable users to operate their air conditioning systems remotely via mobile devices. This connectivity adds convenience and ensures that users can manage their indoor climate at their fingertips. They also come with user-friendly interfaces and programmable timers, allowing for personalized comfort settings.

In conclusion, the Toshiba RAS-B10SKVP-E, RAS-10SAVP-E, and RAS-B13SKVP-E air conditioning units combine energy efficiency, innovative technology, and user-friendly features to deliver exceptional indoor comfort. With their advanced technologies, these models are ideal choices for anyone seeking reliable and effective climate control solutions.