Toshiba RAS-13JKVP-E, RAS-13JAVP-E, RAS-10JKVP-E, RAS-10JAVP-E Remote Control and ITS Functions

Page 5

REMOTE CONTROL AND ITS FUNCTIONS

aInfrared signal transmitter Transmits signals to the indoor unit.

b button

Press the button to start operation. (A receiving beep is heard.) Press the button again to stop operation. (A receiving beep is heard.)

If no receiving sound is heard from the indoor unit, press the button twice.

cMode select button (MODE)

Press this button to select a mode. Each time you press the button, the modes cycle in order from A: Auto

changeover control, : Cool, : Dry, : Heat and back to A.

(A receiving beep is heard.)

dTemperature button (TEMP )

.. The temperature setting is increased to 30°C.

... The temperature setting is reduced to 17°C.

(A receiving beep is heard.)

eFan speed button (FAN)

Press this button to select the fan speed. When you select AUTO, the fan speed is automatically adjusted according to the room temperature. You can also manually select the desired fan speed from five available settings.

(LOW , LOW+ , MED , MED+ ,

HIGH ) (A receiving beep is heard.)

fAuto louver button (SWING)

Press this button to swing the louver. (A receiving beep is heard.)

Press the button again to stop the louver from swinging. (A receiving beep is heard.) () see page 14.)

gSet louver button (FIX)

Press this button to adjust the air flow direction. (A receiving beep is heard.) () see page 14.)

hON timer button (ON)

Use this button to change the clock and ON timer times. To move up the time, press of the “ON ON ” button.

To move down the time, press of the “ON ON ” button.

iOFF timer button (OFF)

Use this button to change the OFF timer times.

To move up the time, press of the “OFF OFF ” button.

To move down the time, press of the “OFF OFF ” button.

jReserve button (SET)

Press this button to store the time settings. (A receiving

beep is heard.)

kCancel button (CLR)

Press this button to cancel the ON timer and OFF timer. (A

receiving beep is heard.)

lHigh power button (Hi POWER)

Press this button to start high power operation. () see

page 16.)

mMemory button (MEMO)

Press this button to ready for storing the settings.

Hold down the button for more than 3 seconds to store the setting indicated on the remote control and until the

mark is displayed. () see page 13.)

nAutomatic operation button (AUTO)

Press this button to operate the air conditioner

automatically.

(A receiving beep is heard.) () see page 16.)

oEconomy button (ECO)

Press this button to operate the air conditioner economically. () see page 16.)

pFILTER button

Press this button to turn off the filter cleaning indicator on the indoor unit.

Press this button after cleaning the air filter. () see

page 19.)

qPRESET button

Press this button to operate the air conditioner according to the settings stored using the MEMO button. () see page 13.)

rAir purifying button (PAP)

Press this button to start the electrical air purifying operation.

Press the button again to stop operation.

sSleep timer button (SLEEP)

Press this button to start the sleep timer (OFF timer) operation.

You can select the OFF timer time from among four settings (1, 3, 5 or 9 hours).

a

r

PAP

 

 

AUTO

n

 

 

 

 

d

 

TEMP

 

 

 

 

 

 

 

c

MODE

 

 

PRESET

q

 

 

 

 

b

 

 

 

 

o

l

 

 

 

 

HiPOWER

ECO

MEMO

m

g

e

 

 

 

1.3.5.9H

f

SWING

FIX

FAN SLEEP

s

k

CLR

 

 

SET

j

 

 

 

 

 

CLOCK

ON

OFF

FILTER

 

 

 

 

p

 

 

 

 

 

RESET

CHECK

 

 

h

 

 

 

i

 

 

 

 

EN

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Klimagerät Geteilte Ausführung Climatiseur Type SepareCondizionatore D’ARIA Tipo Split Acondicionador DE Aire Tipo SeparadoSafety Precautions Accessories AIR Filter ComponentsInstallation Warnings Operation WarningsOperation Cautions Installation CautionsNames of Parts Reset buttonOutdoor unit Indoor unitRemote Control and ITS Functions Loading the remote control batteries Names and Functions of Indicators on Remote ControlPreparation and Check Before USE DisplayInitial setting Setting the clockAdjusting the clock Preparing the filtersLocation of the remote control Using the Remote ControlRemote control holder Installing the remote control holderAutomatic Operation Auto Changeover Automatic OperationStart StopDRY Operation COOLING/HEATING OperationAIR Purifying Operation When the air conditioner is stoppedDuring air conditioner operation To stop only PAP operationHigh power Hi Power Timer OperationSetting Hi Power mode Canceling Hi Power modeCancelling timer operation On timer OFF timer Stop Operation StopSetting combined Timer Clock displayMemo button MEMORY/PRESET OperationWhen the Preset button is pressed during operation Adjusting the vertical air flow Adjusting AIR Flow DirectionAdjusting the horizontal air flow Preparation To set a selected air flow directionAuto Restart Operation HOW to SET Auto RestartHOW to Cancel Auto Restart HOW the AIR Conditioner Works Hi Power operationAutomatic Operation ECO operationTemporary Operation Maintain room temperature at a comfortable levelHints for Economical Operation DRY operationCleaning of indoor unit and remote control Usual MaintenanceWhen not using the unit for at least 1 month Cleaning the air filterCleaning the air inlet grille Cleaning the Zeolite-plus filter and Zeolite-3G filter Special MaintenanceAttaching the Zeolite-plus filter and Zeolite-3G filter Items sold separatelyEnglish Français Deutsch Italiano Cleaning the dust collecting unitPage AIR Conditioner Operation and Performance Poor cooling or heating performance TroubleshootingRecheck Inoperative Condensation forms on the back of the indoor unit Operation indicator turns on and offIndoor unit or outdoor unit makes a strange noise Room air is smelly Bad odor comes from the air conditionerSounds made from the outdoor unit These are not defects Filter indicator turns onSounds made from the indoor unit Reverse cycle, Split type SpecificationsFor cooling For heating Air inlet temperature C Signal Receiving Tone Does Not Sound Settings Cannot be ChangedAuto DRYDeclaration of Conformity

RAS-10JAVP-E, RAS-10JKVP-E, RAS-13JKVP-E, RAS-13JAVP-E specifications

Toshiba is renowned for its advanced air conditioning systems that offer reliable performance and innovative features tailored for diverse environments. The Toshiba RAS-13JAVP-E, RAS-13JKVP-E, RAS-10JKVP-E, and RAS-10JAVP-E models exemplify the brand's commitment to quality and efficiency.

These units are equipped with cutting-edge inverter technology, allowing them to adjust their compressor speed according to the cooling or heating demands of the space, resulting in significant energy savings and stable temperature control. With their ability to operate on low power while maintaining efficiency, these models contribute to lower electricity bills, making them an eco-friendly choice for homeowners and businesses alike.

The RAS-13JAVP-E and RAS-13JKVP-E cater to larger areas with a cooling capacity of 13,000 BTU, while the RAS-10JKVP-E and RAS-10JAVP-E are designed for slightly smaller spaces with a 10,000 BTU output. This versatility makes these units suitable for various installations, from residential spaces to small commercial settings.

Additionally, all four models feature a sleek and modern design, blending seamlessly with contemporary interiors. The user-friendly interface, complete with a remote control, allows for easy operation and program settings, enhancing the overall user experience.

Another key characteristic of these Toshiba units is their advanced air purification technology. Equipped with a high-performance filter system, they effectively remove dust, allergens, and pollutants from the air, ensuring a cleaner and healthier environment for occupants.

Moreover, the units boast a quiet operation mode, making them ideal for bedrooms and offices where noise sensitivity is a concern. The indoor noise level is minimized without compromising performance, allowing for undisturbed relaxation or productivity.

Durability is another hallmark of Toshiba air conditioning systems. These models are built with high-quality materials, designed to withstand varying climates and ensure longevity.

In conclusion, the Toshiba RAS-13JAVP-E, RAS-13JKVP-E, RAS-10JKVP-E, and RAS-10JAVP-E air conditioners represent a perfect blend of efficiency, comfort, and reliability. Their innovative technologies, energy-saving attributes, and superior air quality features make them standout options for anyone looking to enhance their indoor environment.
Top Page Image Contents