Power connector cable
Description | Spare part number |
|
|
Power connector cable | |
|
|
Before removing the power connector cable, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 23).
5.Remove the rear cover (see Rear cover on page 26).
6.Disconnect the battery cable (see Hard drive on page 27).
7.Remove the hard drive (see Hard drive on page 27).
8.Remove the
9.Remove the RTC battery (see RTC battery on page 31).
10.Remove the USB board (see USB board on page 32).
11.Remove the cover bracket (see X-axis capacitor board on page 33).
12.Remove the
13.Remove the converter board (see Converter board on page 35).
14.Remove the media card reader board (see Media card reader board on page 37).
15.Remove the USB connector cable (see USB connector cable on page 38).
16.Remove the speakers (see Speakers on page 39).
17.Remove the display stand recess (see Display stand recess on page 41).
18.Remove the battery (see Battery on page 44).
19.Remove the audio/USB board (see Audio/USB board on page 47).
20.Remove the air flow channel (see Air flow channel on page 51).
21.Remove the fan (see Fan on page 53).
22.Remove the system board (see System board on page 54).
23.Remove the display stand (see Display stand on page 58).
24.Remove the middle frame (see Middle frame on page 59).
Remove the power connector cable:
62 Chapter 4 Removal and replacement procedures