Recovering using HP Recovery Manager

To use the Start screen:

IMPORTANT: For tablets, connect to the keyboard dock before beginning these steps (select models only).

1.From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the charms.

2.Click Settings.

3.Click Change PC settings in the bottom-right corner of the screen, and then select General from the PC settings screen.

4.Scroll the right-side choices down to display Remove everything and reinstall Windows.

5.Under Remove everything and reinstall Windows, select Get started, and then follow the on- screen instructions.

HP Recovery Manager software allows you to recover the computer to its original factory state by using the HP Recovery media that you created or by using the HP Recovery partition (select models only). If you have not already created recovery media, see Creating HP Recovery media on page 70.

Using HP Recovery media, you can choose from one of the following recovery options:

●System Recovery—Reinstalls the original operating system, and then then configures the settings for the programs that were installed at the factory.

●Minimized Image Recovery (select models only)—Reinstalls the operating system and all hardware-related drivers and software, but not other software applications.

●Factory Reset—Restores the computer to its original factory state by deleting all information from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that was installed at the factory.

The HP Recovery partition (select models only) allows System Recovery and Minimized Image Recovery.

What you need to know

●HP Recovery Manager recovers only software that was installed at the factory. For software not provided with this computer, you must either download the software from the manufacturer's website or reinstall the software from the media provided by the manufacturer.

●Recovery through HP Recovery Manager should be used as a final attempt to correct computer issues.

●HP Recovery media must be used if the computer hard drive fails. If you have not already created recovery media, see Creating HP Recovery media on page 70.

●To use the Factory Reset option, you must use HP Recovery media. If you have not already created recovery media, see Creating HP Recovery media on page 70.

●If the HP Recovery media does not work, you can obtain recovery media for your system from the HP website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.

IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal data. Before beginning recovery, back up any personal data you wish to retain.

Restore and recovery 73