HP dx6100 manual Num Lock key

Getting Started

Solving General Problems (Continued)

Problem Cause Solution

Computer date and	RTC (real-time clock)
time display is	battery may need to
incorrect.	be replaced.
	✎ Connecting
	the computer
	to a live AC
	outlet
	prolongs the
	life of the
	RTC battery.

First, reset the date and time under Control Panel (Computer Setup can also be used to update the RTC date and time). If the problem persists, replace the RTC battery. See the Hardware Reference Guide on the Documentation CD for instructions on installing a new battery, or contact an authorized dealer or reseller for RTC battery replacement.

Cursor will not move	The Num Lock key	Press the Num Lock key. The
using the arrow keys	may be on.	Num Lock light should not be on
on the keypad.		if you want to use the arrow
		keys. The Num Lock key can
		be disabled (or enabled) in
		Computer Setup.

Cannot remove	Smart Cover Lock,
computer cover or	featured on some
access panel.	computers, is locked.
	✎ This feature
	is not
	available
	on all
	models.

Unlock the Smart Cover Lock using Computer Setup.

The Smart Cover FailSafe Key, a device for manually disabling the Smart Cover Lock, is available from HP. You will need the FailSafe Key in case of forgotten password, power loss, or computer malfunction.

Getting Started www.hp.com 15