HP dx6100 manual System does not System unable to

Getting Started

Solving General Problems (Continued)

Problem	Cause	Solution
System does not	System unable to	Press and hold the power button
power on and the	power on.	for less than 4 seconds. If the
LEDs on the front of		hard drive LED turns green,
the computer are not		then:
flashing.		1.	Check that the voltage
			selector, located on the
			rear of the power supply
			on some models, is set to
			the appropriate voltage.
			Proper voltage setting
			depends on your region.
		2.	Remove the expansion
			cards one at a time until the
			5 V_aux light on the system
			board turns on.

3. Replace the system board.

18 www.hp.com Getting Started