HP VLI 8 manual Upgrading the Main Memory, Supported HP accessories, connect to the web site

Page 12

2How to Install and Replace Components In Your Desktop PC Upgrading the Main Memory

 

Upgrading the Main Memory

 

 

NOTE

Use only HP memory modules provided for your PC model. The use of

 

other memory modules is not supported. For information about

 

supported HP accessories, connect to the web site

 

www.hp.com/go/vectraaccessories.

 

You can install up to a total of 512 MB (two 256 MB modules). Main

 

 

memory is available in 100 MHz modules of 32 MB, 64 MB, 128 or

 

256 MB. (Although the 256 MB memory modules are ECC, the ECC

 

feature is not used by this PC.)

Location of Main Memory (modules can be installed in

either slot)

1Remove the PC’s cover (described in this chapter).

2Line up the two side notches correctly and insert the new memory module. (You can use either slot.)

3Replace the cover (described in this chapter).

54

Image 12
Contents Product Hard Video Std Multi-media Number Drive ControllerModels with Intel Pentium II Processor D7941A/TProduct Hard Number Drive Video Controller Std D7961A/TD7962A/T D7963A/TInput Devices Video DisplaysMass Storage MultimediaSystem Board Main MemoryProcessor Pentium Switch Function Default Reserved Do Not Use Clears User and Administrator passwordsSystem Frequency1 Switch 2332 MHzPart Numbers Parts List for HP Vectra VLi 8 PC Description Repl Exchange Part NumberDescription Repl Exchange Part Number System board Processors SECC2 packageMain memory modules Removing and Replacing the Cover Removing the CoverReplacing the Cover Label Inside Your PC Disk driveSupported HP accessories, connect to the web site Feature is not used by this PCUpgrading the Main Memory Upgrading and Installing Mass Storage Devices Drive ConnectorsBefore Installing an IDE Hard Disk How to do this Upgrading the Hard Disk DriveComponents Appears during startup Installing a Second Hard Disk Drive Appears during startup Installing Removable Media Devices Audio Connector Optional Configuring an IDE Device After Installation Replacing the Floppy Drive Installing Accessory Boards Accessory Board SlotsPC has four accessory board slots InchesInstalling an Accessory Board Remove the retaining bracketPage Accessory board To enter the Setup program, press F2 during startupAdvanced menu of the Setup program to Disabled Configuring Accessory Boards with Plug and Play Accessory boardsInformation about installing accessory boards AvailableConfiguring non-Plug and Play ISA Accessory Boards Replacing the Processor Replacing the System Board Page Replacing the Power Supply Remove all internal power supply connectorsPage Changing the Battery Installing a Security Cable