HP VLI 8 manual Installing Removable Media Devices

Page 19

2How to Install and Replace Components In Your Desktop PC Upgrading and Installing Mass Storage Devices

Installing Removable Media Devices

The PC has an integrated Enhanced IDE controller which supports up to four IDE devices. Removable media IDE devices, such as CD-ROM drives, DVD drives, tape drives and Zip drives, require front access. You can install a removable media IDE drive in an empty front shelf.

Refer to the drive’s manual to see if you must set jumpers or if there is a special installation procedure to follow.

1Remove the computer’s cover (described in this chapter).

2If there is already a drive installed in the front bay, remove its power and data connectors (so that you can remove the drive bay).

3Pull out the sliding latch ➊ and remove the drive bay ➋.

➊

➋

4Align the new device in the bay (with the correct orientation) and secure it with the screws provided.

61

Image 19

Contents D7941A/T Product Hard Video Std Multi-mediaNumber Drive Controller Models with Intel Pentium II ProcessorD7963A/T Product Hard Number Drive Video Controller StdD7961A/T D7962A/TMultimedia Input DevicesVideo Displays Mass StorageMain Memory System BoardProcessor Pentium 2332 MHz Switch Function Default Reserved Do Not UseClears User and Administrator passwords System Frequency1 SwitchPart Numbers Description Repl Exchange Part Number Parts List for HP Vectra VLi 8 PCProcessors SECC2 package Description Repl Exchange Part Number System boardMain memory modules Removing the Cover Removing and Replacing the CoverReplacing the Cover Disk drive Label Inside Your PCFeature is not used by this PC Supported HP accessories, connect to the web siteUpgrading the Main Memory Drive Connectors Upgrading and Installing Mass Storage DevicesBefore Installing an IDE Hard Disk Upgrading the Hard Disk Drive How to do thisComponents Appears during startup Installing a Second Hard Disk Drive Appears during startup Installing Removable Media Devices Audio Connector Optional Configuring an IDE Device After Installation Replacing the Floppy Drive Inches Installing Accessory BoardsAccessory Board Slots PC has four accessory board slotsRemove the retaining bracket Installing an Accessory BoardPage To enter the Setup program, press F2 during startup Accessory boardAdvanced menu of the Setup program to Disabled Available Configuring Accessory Boards with Plug and PlayAccessory boards Information about installing accessory boardsConfiguring non-Plug and Play ISA Accessory Boards Replacing the Processor Replacing the System Board Page Remove all internal power supply connectors Replacing the Power SupplyPage Changing the Battery Installing a Security Cable