HP VLI 8 manual Changing the Battery

Page 34

WARNING

2How to Install and Replace Components In Your Desktop PC Changing the Battery

Changing the Battery

There is a danger of explosion if the battery is incorrectly installed. For your safety, never attempt to recharge, disassemble, or burn the old battery. Replace the battery only with the same or equivalent type recommended by the manufacturer. The battery in this PC is a lithium battery which does not contain heavy metals, nevertheless, in order to protect the environment, do not dispose of batteries in household waste. Please return used batteries to the shop from which you bought them, or to the dealer from which you purchased your PC, or to HP, so that they can either be recycled or disposed of in an environmentally sound way. Returned used batteries will be accepted free of charge.

You should order replacement battery HP 1420-0356 from your local Sales and Service office, or a “CR2032 type” battery, which is available from most local stores.

After removing the computer’s cover:

1Remove the old battery by pressing the retaining clip with a screwdriver and lifting the battery clear of the battery holder.

2Place the new battery in the battery holder, with the “+“ sign on top, and ensure it is properly seated.

After installing a replacement battery, replace the computer’s cover and run the Setup program to reconfigure the computer. You enter Setup by pressing F2 at startup.

76

Image 34
Contents Models with Intel Pentium II Processor Product Hard Video Std Multi-mediaNumber Drive Controller D7941A/TD7962A/T Product Hard Number Drive Video Controller StdD7961A/T D7963A/TMass Storage Input DevicesVideo Displays MultimediaMain Memory System BoardProcessor Pentium System Frequency1 Switch Switch Function Default Reserved Do Not UseClears User and Administrator passwords 2332 MHzPart Numbers Parts List for HP Vectra VLi 8 PC Description Repl Exchange Part NumberProcessors SECC2 package Description Repl Exchange Part Number System boardMain memory modules Removing and Replacing the Cover Removing the CoverReplacing the Cover Label Inside Your PC Disk driveFeature is not used by this PC Supported HP accessories, connect to the web siteUpgrading the Main Memory Upgrading and Installing Mass Storage Devices Drive ConnectorsBefore Installing an IDE Hard Disk Upgrading the Hard Disk Drive How to do thisComponents Appears during startup Installing a Second Hard Disk Drive Appears during startup Installing Removable Media Devices Audio Connector Optional Configuring an IDE Device After Installation Replacing the Floppy Drive PC has four accessory board slots Installing Accessory BoardsAccessory Board Slots InchesInstalling an Accessory Board Remove the retaining bracketPage To enter the Setup program, press F2 during startup Accessory boardAdvanced menu of the Setup program to Disabled Information about installing accessory boards Configuring Accessory Boards with Plug and PlayAccessory boards AvailableConfiguring non-Plug and Play ISA Accessory Boards Replacing the Processor Replacing the System Board Page Replacing the Power Supply Remove all internal power supply connectorsPage Changing the Battery Installing a Security Cable