QuickSpecs
HP SAS Hard Drives
Technical Specifications
Operating Temperature 50° to 95° F (10° to 35° C) (System Inlet Air
Temperature)
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
Application | SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work | ||
| load intensive applications where 24/7 duty cycles are a requirement, such as database applications and | ||
| high transaction level applications. |
| |
|
| ||
Transfer rate | The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server | ||
| backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated | ||
| down to an acceptable level for all components. |
| |
|
|
|
|
HP 600GB 6G SAS 15K rpm | Capacity | 600,127MB | |
LFF |
| Height | 1.06 in (26.8 mm) |
Enterprise 3yr Warranty |
| ||
| Width | 4.16 in (105.8 mm) | |
Hard Drive |
| ||
| Depth | 6.69 in (170.0 mm) | |
|
| ||
|
| Interface | SAS |
|
| Transfer Rate | 6 Gb/sec |
|
| Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.2 ms |
Average | 3.5 ms |
6.8 ms | |
Rotational Speed | 15000 rpm |
Bytes/Sector | 512 |
Logical Blocks | 1,172,123,568 |
50° to 95° F (10° to 35° C) |
|
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 13 |