QuickSpecs
HP SAS Hard Drives
Technical Specifications
LFF
Height | 1.165 in (29.6 mm) |
Width | 4.157 in (105.6 mm) |
Depth | 5.787 in (147.0 mm) |
Interface | SAS |
Transfer Rate | 6Gb/sec |
Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.7 ms |
Average | 8.5 ms |
18.2 ms | |
Rotational Speed | 7,200 rpm |
Bytes/Sector | 512 |
Logical Blocks | 3,907,029,168 |
50° to 95° F (10° to 35° C) |
|
| ||
Products and Approach | and Recycling | programs in many geographic areas. For |
|
| http://www.hp.com/go/green. To recycle your product, please go to: |
|
| http://www.hp.com/go/green or contact your nearest HP sales office. |
|
| Products returned to HP will be recycled, recovered or disposed of in a |
|
| responsible manner. |
|
| The EU WEEE directive (2002/95/EC) requires manufacturers to provide |
|
| treatment information for each product type for use by treatment facilities. |
|
| This information (product disassembly instructions) is posted on the Hewlett |
|
| Packard web site at: http://www.hp.com/go/green. These instructions may be |
|
| used by recyclers and other WEEE treatment facilities as well as HP OEM |
|
| customers who integrate and |
|
|
|
© Copyright 2013
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 33 |