QuickSpecs
HP SAS Hard Drives
Technical Specifications
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application | SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work | ||
| load intensive applications where 24/7 duty cycles are a requirement, such as database applications and | ||
| high transaction level applications. |
| |
|
| ||
Transfer rate | The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server | ||
| backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated | ||
| down to an acceptable level for all components. |
| |
|
|
|
|
HP 600GB 6G SAS 15K rpm | Capacity | 600,127,266,816 | |
LFF |
| Height | 1.04 in (26.4 mm) |
Enterprise 3yr Warranty |
| ||
| Width | 4.36 in (110.7 mm) | |
Hard Drive |
| ||
| Depth | 7.43 in (188.7 mm) | |
|
| ||
|
| Interface | SAS |
|
| Transfer Rate | 6 Gb/sec |
|
| Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.2ms |
Average | 3.5ms |
6.8ms | |
Rotational Speed | 15,000rpm |
Bytes/Sector | 512 |
Logical Blocks | 1,172,123,568 |
50° to 95° F (10° to 35° C) |
|
HP 450GB 6G SAS 15K rpm | Capacity | 450,098,159,616 |
| |
LFF |
| Height | 1.04 in (26.4 mm) |
|
Enterprise 3yr Warranty |
|
| ||
| Width | 4.36 in (110.7 mm) |
| |
Hard Drive |
|
| ||
| Depth | 7.43 in (188.7 mm) |
| |
|
|
| ||
|
| Interface | SAS |
|
|
| Transfer Rate | 6 Gb/sec |
|
|
| Synchronous (Maximum) |
|
|
|
| Seek Time | Single Track | 0.2ms |
|
| (typical reads, including | Average | 3.5ms |
|
| settling) | 6.8ms | |
|
|
| ||
|
|
| Rotational Speed | 15,000rpm |
|
| Physical Configuration | Bytes/Sector | 512 |
|
|
| Logical Blocks | 879,097,968 |
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 21 |