QuickSpecs
HP SAS Hard Drives
Technical Specifications
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
Application | SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work | ||
| load intensive applications where 24/7 duty cycles are a requirement, such as database applications and | ||
| high transaction level applications. |
| |
|
| ||
Transfer rate | The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server | ||
| backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated | ||
| down to an acceptable level for all components. |
| |
|
|
|
|
HP 1.2TB 6G SAS 10K rpm | Capacity | 1,200,243MB | |
SFF |
| Height | 0.62 in (15.6 mm) |
Enterprise 3yr Warranty |
| ||
| Width | 2.98 in (75.7 mm) | |
Hard Drive |
| ||
| Depth | 4.67 in (118.7 mm) | |
|
| ||
|
| Interface | SAS |
|
| Transfer Rate | 6 Gb/sec |
|
| Synchronous (Maximum) |
|
Seek Time
(typical reads, including settling)
Physical Configuration
Operating Temperature
(System Inlet Air Temperature)
Single Track | 0.3 ms |
Average | 4.6 ms |
8.9 ms | |
Rotational Speed | 10,000 rpm |
Bytes/Sector | 512 |
Logical Blocks | 2,344,225,968 |
50° to 95° F (10° to 35° C) |
|
HP 900GB 6G SAS 10K rpm | Capacity | 900,185MB |
| |
SFF |
| Height | 0.62 in (15.6 mm) |
|
Enterprise 3yr Warranty |
|
| ||
| Width | 2.98 in (75.7 mm) |
| |
Hard Drive |
|
| ||
| Depth | 4.67 in (118.7 mm) |
| |
|
|
| ||
|
| Interface | SAS |
|
|
| Transfer Rate | 6 Gb/sec |
|
|
| Synchronous (Maximum) |
|
|
|
| Seek Time | Single Track | 0.21 ms |
|
| (typical reads, including | Average | 3.8 ms |
|
| settling) | 7.4 ms | |
|
|
| ||
|
|
| Rotational Speed | 10,000 rpm |
|
| Physical Configuration | Bytes/Sector | 512 |
|
|
| Logical Blocks | 1,758,174,768 |
DA - 12244 Worldwide — Version 44 — December 9, 2013 | Page 8 |