2.Remove the server blade (on page 23).
3.Remove the access panel ("Access panel" on page 24).
4.Remove the battery tray.
To replace the component, reverse the removal procedure.
System board
To remove the component:
1.Power down the server blade (on page 23).
2.Remove the server blade (on page 23).
3.Remove the access panel ("Access panel" on page 24).
4.Remove all hard drives ("Hard drive" on page 24).
5.Remove the DIMM baffle ("DIMM baffle" on page 25).
6.Remove all DIMMs ("DIMMs" on page 26).
7.Remove any mezzanine cards ("Mezzanine card" on page 27).
8.Remove the USB key, if any ("Component identification" on page 51).
9.Remove the battery tray ("Battery tray" on page 36).
10.Remove the heatsink ("Heatsink" on page 30).