System Overview
2.3.5 Mass Storage
All models support at least two mass storage devices, with one being externally accessible for removable media. These systems provide the following interfaces for internal storage devices:
USDT: one SATA interface, one
SFF: three SATA interfaces
CMT: four SATA interfaces
These systems may be preconfigured or upgraded with a SATA hard drive and one removable media drive such as a
2.3.6 Serial and Parallel Interfaces
The SFF and CMT form factors include a serial port and a parallel port, both of which are accessible at the rear of the chassis. The SFF and CMT form factors may be upgraded with a second serial port option.
The serial interface is
2.3.7 Universal Serial Bus Interface
All models provide ten Universal Serial Bus (USB) ports. Two ports are accessible at the front of the unit, six ports are accessible on the rear panel, and two ports are accessible on the system board. The SFF and CMT form factors support a media card reader module that connects to the two internal ports. These systems support USB 1.1 and 2.0 functionality on all ports.
2.3.8 Network Interface Controller
All models feature an Intel gigabit Network Interface Controller (NIC) integrated on the system board. The controller provides automatic selection of
| Technical Reference Guide | www.hp.com |