Rear View, Detail “X”, Detail “Y” Unit With Rain Hoods

530.18-N11Y

CONDENSER
SECTION
GAUGE LINE
ACCESS
40-3/8"
	SUPPLY
	AIR
5-1/2"
COMPRESSOR
ACCESS
SUPPLY AIR
ACCESS	18-5/8"
RETURN AIR	5-1/8"
ACCESS

RETURN

AIR

OUTDOOR

AIR

27-3/4"

EVAPORATOR

SECTION

DOT PLUG (For pressure drop reading)

FILTER

ACCESS

40-1/2"

1" NPT FEMALE COND. DRAIN CONNECTION

DUCT COVERS - Units are shipped with the bottom duct openings covered. An accessory flange kit is avail- able for connecting side ducts.

For bottom duct applications:

1.Remove the side panels from the supply and return air compartments to gain access to the bottom supply and return air duct covers.

2.Remove and discard the bottom duct covers. (Duct openings are closed with sheet metal covers except when the unit includes a power exhaust option. The covering consists of a heavy black paper composition.)

3.Replace the side supply and return air compartment panels.

For side duct applications;

1.Replace the side panels on the supply and return air compartments with the accessory flange kit panels.

2.Connect ductwork to the duct flanges on the rear of the unit.

REAR VIEW

39-5/8

OUTDOOR AIR COMPARTMENT ACCESS

DETAIL “X”

ACCESSORY SIDE SUPPLY AND RETURN AIR OPENINGS

DETAIL “Y”

UNIT WITH RAIN HOODS

FIG. 10 - DIMENSIONS & CLEARANCES (Cont’d.)- DCE & DCG

12	Unitary Products Group

D2CG300, D2CE specifications

The York D2CE and D2CG series represent cutting-edge advancements in energy-efficient chiller technology, specifically designed to optimize performance in a variety of commercial and industrial applications. These chillers are known for their ability to deliver reliable cooling while minimizing energy consumption, making them a preferred choice for businesses aiming to reduce their carbon footprint and operational costs.

One of the standout features of the York D2CE and D2CG chillers is their utilization of advanced scroll compressor technology. This technology not only enhances the reliability of the systems but also significantly improves energy efficiency, allowing for lower operational costs. The chillers are built to provide high efficiency across a diverse range of operating conditions, ensuring consistent performance during peak loads.

The D2CE series, designed primarily for air-cooled applications, benefits from a compact and modular design, allowing for flexible installation in tight spaces. Additionally, its quiet operation makes it suitable for use in noise-sensitive environments, such as healthcare facilities and educational institutions. The model is equipped with microprocessor controls that facilitate precise temperature regulation and system diagnostics, ensuring optimal operation.

Conversely, the D2CG series focuses on water-cooled applications, featuring robust construction that accommodates higher cooling capacities. This model also includes advanced heat exchanger technology, which maximizes heat transfer efficiency. The D2CG’s intelligent controls not only help in energy management but also provide remote monitoring capabilities, allowing facility managers to analyze performance and troubleshoot issues from anywhere.

Both models utilize environmentally friendly refrigerants, aligning with global regulations and promoting sustainability. Enhanced filtration options are available, enabling the units to maintain high indoor air quality by minimizing dust and other pollutants.

In addition to their energy-saving attributes, the York D2CE and D2CG chillers are designed for ease of maintenance, with accessible components and modular parts that simplify service procedures. This, coupled with their durable construction, leads to greater longevity and reliability in operation.

In summary, the York D2CE and D2CG chillers are leading examples of modern HVAC engineering, combining efficiency, flexibility, and sustainability. Their innovative technologies and thoughtful design make them an excellent addition to any facility looking to enhance its cooling systems while adhering to environmental standards.