HP 5000 Router manual Introduction

Page 39

Introduction 37

Upgrading Application It refers to downloading application program through Ethernet port. The router Program with Ethernet serves as client, so it needs to be connected to TFTP Server or FTP Server through its fixed Ethernet port. The following are the details.

CAUTION: TFTP Server or FTP Server program is not included in 5000 Family routers, so you have to buy and install it.

Both TFTP loading and FTP loading are available in 5000 Family routers.

1Start TFTP server or FTP server at the PC connecting the Ethernet port of the router and configure path for the files to be loaded. For FTP Server, you should also set username and password.

2Enter NET download menu

3Select <2> in BOOT menu to turn to NET download menu.

Net Port Download Menu:

1:Change Net Parameter

2:Download From Net

3:Exit to Main Menu Enter your choice(1-3):1

4Configure parameters

Select <1> in NET download menu to turn to parameter configuration interface.

Change Boot Parameter:
'.' = clear field;		'-' = go to previous field; ^D = quit
boot device		: fei0
processor number		:	0
host name		:	8040
file name	: M8240ram.arj
inet on ethernet (e)		: 169.254.10.10
inet on backplane (b):
host inet (h)		: 169.254.10.11
gateway inet (g)		:
user (u)	: 8040
ftp password (pw) (blank = use rsh):
flags (f)	: 0x0
target name (tn)		:
startup script (s)		:
other (o)		:

5Configure these parameters for TFTP mode file name: File name to be loaded

inet on ethernet (e): IP address for the Ethernet port for loading

host inet (h): IP address for TFTP Server

flags (f): The flag must be 0x80 for TFTP mode

6Configure these parameters for FTP mode file name: File name to be loaded

inet on ethernet (e) : IP address for the Ethernet port for loading

host inet (h) : IP address for FTP Server

user (u): User name, which must be consistent with that for FTP Server

ftp password (pw) (blank = use rsh): Password, which must be consistent with that for FTP Server

Image 39

Contents Router 5000 Family Installation Guide 01752-3064 3Com CorporationCampus Drive Marlborough, MAContents Troubleshooting List conventions that are used throughout this guide About this GuideConventions Protocols that are used to interconnect WANsDocumentation RelatedIntroducing the Router Family Fixed ports Router 5000 Family Console Port SpecificationsRouter 5000 Family HardwareLists the attributes of the Router 5000 Family AUX port GroundLEDs Table below describes the LEDs on the Router Router 5232, 5642, 5682 LEDs Describes the LEDs on the Router 5232, 5642, 5682 routersFront View of the Router System Specifications for the RouterDescription Attribute Synchronous Asynchronous Synchronous/Asynchronous Serial Port SpecificationsRouter 5642 specifications Router 5232 specificationsRouter 5682 specifications System Specifications for the Router Introducing the Router 5000 Family Installing the Router Gases Temperature and HumiditySpecification for Dust Content DustLightning Damage Electromagnetic DischargeA Rack Mounting the RouterOn the Workbench Installing the RouterConnecting the Power Connecting the RouterInstalling SICs and MIMs Use shielded cables to ensure electromagnetic compatibility To the EthernetThat uses category-5 twisted pair cable Fixed Ethernet cables are supplied with the routerPort to a CSU/DSU Connecting the AUX Port to the Analog ModemVerifying Installing the Router To a Local Console Booting and Configuring RouterConnecting the Router to a Remote Console Terminal Connector to the serial port of a PC, as shown belowShown below SettingParameters Console Terminal To set terminal parametersParity None Stop bits Set the following parameters Bits per second 9600 Data bitsHyperTerminal Window Connect Dialog Box Powering on RouterConfiguration Startup ProcessFundamentals Router Configuration Fundamentals of the Router Ethernet Serial synchronous/asynchronous Asynchronous E1/T1 Naming and Arranging InterfacesBoot Menu Boot Menu Maintaining the RouterIntroduction Options of Boot ROM operation menu include Through XModemUpgrading application program Send File dialog box Upgrading the extended Upgrading the entire Boot ROM programRestoring the Extended Segment of Boot ROM Program Restore the extended segment of Boot ROM program from FlashIntroduction Router restarts after successful upgrading Press Enter to reboot the systemBuild up FTP remote upload/download environment Build up FTP local upload/download environmentAdd right level Specify FTP directoryStart FTP server Ftpquit Cover Troubleshooting Power LED is OffNothing is Displayed on the Terminal after Power-On Display on Power-OnRepeated Reboot Illegible CharactersRUN LED Blinks Slowly After Startup After Startup, All LEDs Remain OnRUN LED Remains On RUN LED Blinks Rapidly During SartupTroubleshooting Console Cable Pinouts Cable SpecificationsSignal Direction DB-25 DB-9 Console CableEthernet Cable AUX CableCrossover Network Cable Pinouts Signal Category Signal DirectionSignal Twisted Pair Signal Direction Straight-through Network Cable PinoutsEIA/TIA-232 Maximum Transmission Baud rate bps Distance m Serial Interface Cable Synchronous and Asynchronous ModeDTE and DCE Mode Typical DTE and DCE24 DTE Cable Pinouts DB-50 Signal Signal Direction DB-25Pinouts Describes the V.24 DTE cable pinouts24 DCE Cable Pinouts DCE Cable illustrates the V.24 DCE cable assemblyAssembly and Pinouts Describes the V.24 DCE cable pinoutsDB-50 Signal Signal Direction Describes the V.35 DTE cable pinouts35 DTE Cable Pinouts Describes V.35 DCE cable pinouts 35 DCE cable Pinouts DCE Cable illustrates the V.35 DCE cable assemblyDescribes T1 cable pinouts Dumb Terminal AdapterE1 Cable T1 CablePin 4 and pin 5 are the receiving end Isdn cablesProduct Support telephone numbers posted on the 3Com web site at Warranty, you can obtain an RMA number online at PasswordContact Us Number, URL or e-mail address from the list belowUS and Canada Telephone Technical Support and Repair Latin America Telephone Technical Support and RepairAppendix a Obtaining Support for Your Product