HP 7410xi To check your network connection, To select a new network name, do one of the following

Page 41

Chapter 9

To check your network connection

1Check the radio on indicator light on the lid of your HP all-in-one to see whether the radio is on.

2If the indicator light is off, do the following:

a On the control panel of the HP all-in-one, press the Setup button. b Press 8, press 5, and then press 1.

3If the radio is on, or goes on as a result of step 2, press the On button to turn off the HP all-in-one, and then press it again to turn it on. Also, turn off the power on your router and then turn it on again.

Cause

There is radio interference.

Solution

If there is a long distance between your computer and the HP all-in-one, move them closer together. If possible, provide a clear path between the computer and print server, and minimize sources of radio interference. Devices such as cordless phones and microwave ovens may also cause radio interference.

Unable to determine or verify network name during installation

Cause

Setup has either detected multiple networks or has been unable to read or verify the network name from the access point.

Solution

Select a new network name (SSID).

To select a new network name, do one of the following

●In the Select Network Name screen, enter a new SSID. If you choose to enter the wireless Network Name (SSID), also select the Communication Mode (ad hoc or Infrastructure).

Note The SSID entry is case-sensitive, and it can be up to 32 alphanumeric characters long, including spaces. You cannot leave the Network Name box blank.

●In the Select Network Name screen, select an existing network name from the list. Up to 12 SSIDs might be listed. The SSIDs are detected when the internal networking component boots up.

Verification fails at end of installation

Cause

You might not have the correct wireless authentication or encryption type selected. You might be using an unsupported authentication or encryption type.

38

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Wireless and Wired Network Guide HP all-in-one Network Guide Safety information Contents Page Get started Wireless connection with an access point infrastructureChoose a network type Choose a connection typeWireless connection without an access point ad hoc Switch from a USB connection to a network connectionWired connection Ethernet To switch a USB connection to a network connectionGet HP support Connect additional computersChapter Wireless connection networks Choose a recommended wirelessWireless infrastructure network NetworkChapter Wireless connection to a wired network Chapter Router gateway Choose a recommendedEthernet network Computer gateway Ethernet connection to a wireless network Ethernet connection to a wired network without InternetChapter What you need Connect to a wireless networkWith an access point Connect to the network HP all-in-one Network Guide Chapter Prepare your computer Without an access pointFor Windows Create a network profileFor Macintosh For operating systems other than Windows XP and Mac OSHP all-in-one Network Guide To create a new network profile on your Mac OS For Mac OSAirPort icon Select Create Network…Select Enter a New Network Name Ssid Connect to the network using the Wireless Setup WizardChapter Cable Connect with an EthernetConnect your HP all-in-one For Windows Install the softwareTo install your HP all-in-one software For Macintosh Restore network defaults View network settingsManage your network Use the HP all-in-one control panelAdvanced network settings Turn the wireless radio on and offTo change an IP setting Access the Embedded Web ServerTo access the Embedded Web Server Use the Embedded Web ServerAdd security to the network To add WEP encryption Click Start Wizard Wireless Network Name page appearsTo add WPA-PSK security Chapter Wireless setup wizard troubleshooting Network troubleshootingError message Cannot connect to network Cause SolutionYou dont see the Ssid Cause Wireless network setup troubleshootingError message Invalid passkey Cause Printer Not Found screen appears during installation Cause Received a System Requirements Error No TCP/IP CauseTo select a new network name, do one of the following Verification fails at end of installation CauseTo check your network connection Click Start Wizard To use the control panelTo use the Embedded Web Server Setup failed Cause Computer is unable to discover the HP all-in-one Cause Wireless discovery troubleshootingTo make sure your network connection is active Network iconYour access point is not broadcasting its network name Ssid HP all-in-one cannot find the computer ad hoc Cause Encryption settings are incorrect Click Device Manager Wired network setup troubleshootingTo check your LAN card in Windows XP To establish an active network connection Wired network iconPrinter Not Found screen appears during installation Cause Other users on the network can access my memory card Cause Common Internet File System troubleshootingCannot access Cifs server in Windows Cause File names have arbitrary characters CauseGeneral network settings Configuration page definitionsAppendix a Wireless network settings Appendix a Miscellaneous Appendix a Glossary Access pointNIC Index Wireless network Q3462-90198
Related manuals
Manual 4 pages 42.66 Kb Manual 4 pages 16.14 Kb Manual 242 pages 33.9 Kb Manual 12 pages 10.64 Kb Manual 241 pages 30.18 Kb Manual 16 pages 45.99 Kb

7410, 7410xi, 2710xi specifications

The HP 7410 is a multifunction printer that has gained popularity for its versatility and efficiency in both home and office environments. Designed to handle a variety of tasks, the HP 7410 seamlessly integrates printing, scanning, copying, and faxing capabilities into one compact device. This combination of features makes it an ideal choice for users looking to save space without sacrificing functionality.

One of the standout features of the HP 7410 is its ability to print in high quality. It can produce crisp black text and vibrant color documents with a maximum print resolution of up to 4800 x 1200 optimized dpi on certain media types. The printer utilizes HP’s innovative ink technology, which enhances color accuracy and delivers professional-grade prints. Additionally, the 7410 offers a fast print speed, averaging up to 30 pages per minute for black-and-white documents and around 20 pages per minute for color.

The scanning capabilities of the HP 7410 are equally impressive. It features a flatbed scanner that supports scanning of various media sizes, including legal-sized documents. With a maximum optical scanning resolution of up to 1200 x 1200 dpi, users can expect clear and detailed scans, making it ideal for digitizing important documents and images. The printer also supports automatic duplex scanning, which saves time and reduces paper usage.

In terms of connectivity, the HP 7410 comes equipped with multiple options, including USB and Ethernet connections, enabling easy integration into both wired and wireless networks. Furthermore, the printer supports mobile printing solutions, allowing users to print directly from their smartphones or tablets using HP’s mobile printing apps. This feature enhances convenience, bridging the gap between digital and physical document handling.

Another significant characteristic of the HP 7410 is its user-friendly interface. The device features an intuitive control panel with a sizable LCD display, simplifying navigation through its various functions and settings. Additionally, the printer includes an automatic document feeder (ADF) that holds up to 50 sheets, enhancing productivity for larger print jobs.

Overall, the HP 7410 is an outstanding multifunction printer that delivers exceptional performance across its various capabilities. Its combination of printing, scanning, copying, and faxing functions, along with robust connectivity options and ease of use, makes it an excellent choice for both personal and professional environments. For users seeking a reliable and versatile printing solution, the HP 7410 stands out as a formidable option.
Top Page Image Contents