Fax
Set up fax
Find setup information (for users in Europe)
English
Check the “Finding fax setup information in Europe” box. If your country/region is listed, visit the website for setup information. If it is not listed, follow the instructions in this guide.
Finding fax setup information in Europe
If you are in one of the following countries/regions, visit www.hp.com/uk/faxconfig for information about setting up fax.
Austria | Germany | Portugal |
Belgium | Ireland | Spain |
Denmark | Italy | Sweden |
Finland | Norway | Switzerland |
France | Netherlands | United Kingdom |
Connect the phone line
Using the phone line for fax only
Note: If a phone cord is provided with the printer, HP recommends that you use this phone cord. If the phone cord is not long enough, use a coupler and another phone cord to extend.
1.Connect one end of the phone cord to the phone wall jack.
2.Connect the other end to the port labeled
Note: Do not insert into the port labeled
3.If you have subscribed to a DSL/ADSL service, connect a DSL/ADSL filter between the printer port labeled
How do I set up HP printers in digital phone environments?
HP printers are designed specifically for use with traditional analog phone services. If you are in a digital phone environment (such as DSL/ADSL, PBX, ISDN, or FoIP), you might need to use
Note: The printer might not be compatible with all digital service lines or providers in all digital environments or with all
Note: If you are setting up ring pattern detection in a PBX phone system that has different ring patterns for internal and external calls, make sure you dial the fax number of your printer using an external number when recording the ring pattern.
1.Phone wall jack
2.Port labeled
3.DSL/ADSL filter (provided by the telephone company or service provider)
4