HP 7500A Wide Format - E9 manual Test fax setup, Connecting additional equipment

Page 11

Connecting additional equipment

Remove the white plug from the port labeled 2-EXT on the back of the printer, and then connect a phone to this port.

If you are connecting additional equipment, such as a dial-up computer modem or a telephone, you will need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.

Note: If you subscribe to a DSL/ADSL service, connect to the DSL/ADSL filter to the parallel splitter, and then use the HP-provided telephone cord to connect the other end of the filter to the 1-Line port on the printer. Remove the white plug from the port labeled 2-EXT on the back of the printer, and then connect a telephone set or telephone answering machine to the 2-EXT port. Next, connect the second port of the parallel splitter to the DSL/ADSL modem which is connecting to the computer.

English

1

 

3

 

4

6

2

 

5

 

71 Telephone wall jack 2 Parallel Splitter

3 DSL/ADSL filter (available from your DSL/ADSL service provider)

4 Phone cord provided with printer

5 DSL/ADSL Modem

6Computer

7 Telephone

Step 2: Test fax setup

Test your fax setup to check the status of the printer and make sure it is set up properly for faxing.

The fax test does the following:

•Tests the fax hardware

•Verifies the correct type of phone cord is connected to the printer

•Checks that the phone cord is plugged into the correct port

•Checks for a dial tone

•Checks for an active phone line

•Tests the status of your phone line connection

1.From the printer control panel, touch and then touch Setup.

2.Touch Tools, and then touch Run Fax Test. The printer displays the status of the test on the display and prints a report. After the test is finished, the printer prints a report with the results of the test. If the test fails, review the report for information on how to fix the problem and rerun the test. For additional troubleshooting information, see ”Problems setting up the printer” on page 22.

3.Once the fax test has run successfully, go to ”Step 3: Configure fax settings” on page 10.

Set up and use fax

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Officejet 7500A Page Contents Where’s the user guide? Use the printerLearn more HP Digital SolutionsScan to Computer HP Digital Fax Fax to PC and Fax to MacHP Apps Internet featuresHP ePrint Marketsplash by HPFinding fax setup information Set up and use faxSet up fax Before you begin… Connect the printer to the phone lineConnecting to a DSL/ADSL line What is a distinctive ring service?Connecting additional equipment Test fax setupWhere can I change fax settings? Configure fax settingsSet up and use fax Send a fax Use faxSend a fax from an extension phone Send a standard faxReceive a fax automatically Faxes and your voice mail serviceReceive faxes Reprint received faxes from memory Receive a fax manuallyTo print a report Working with reports and logsFax and digital phone services What is my network name and passkey? Set up wireless 802.11 communication some models onlyWindows Connect the printer to your wireless networkInstall software for your printer Connecting without a wireless routerMac OS Test the wireless connectionChange the connection method Problems installing the software Solve setup problemsProblems setting up the printer Run the fax test Problems setting up faxCheck the list of possible problems Printer is having problems sending and receiving faxesPrinter can send faxes but cannot receive faxes Printer cannot send faxes but can receive faxes Windows Wireless 802.11 setup problemsMake sure the wireless 802.11 light is turned on After resolving the problems…Reducing interference Check the wireless signal strengthRestart components of the wireless network Run the Wireless Network TestTo open the EWS Use the Embedded Web server EWSHewlett-Packard limited warranty statement Page Contenido ¿Dónde se encuentra la guía del usuario? Uso de la impresora¡Sepa más Escanear para equipoFax digital HP Fax a PC y Fax a Mac Funciones de Internet Nota Para obtener una lista de los Marketsplash por HPBúsqueda de información de configuración de fax Configurar y usar el faxConfigurar para fax Antes de comenzar… Paso 1 Conecte la impresora a la línea telefónicaConexión a línea DSL/ADSL ¿Que es un servicio de timbre especial?Conexión de equipo adicional Paso 2 Prueba de la configuración de fax¿Dónde puedo cambiar los ajustes de fax? Paso 3 Configure los ajustes de faxConsejo También puede usar la Seleccione Encender o Apagar Enviar un fax Usar el faxEnviar un fax desde una extensión Enviar un fax estándarRecibir un fax automáticamente Recibir faxesFaxes y servicio de correo de voz Reimpresión de faxes recibidos desde la memoria Recepción manual de un faxPara borrar el registro de fax Trabajo con informes y registrosFax y servicios telefónicos digitales ¿Cuál es mi nombre de red y clave de acceso? Conexión sin direccionador inalámbrico Paso 1 Conecte la impresora a la red inalámbricaPaso 2 Instale el software de la impresora Paso 3 Compruebe la conexión inalámbrica Haga clic en el icono Utilidad de HP en el dock Cambiar el método de conexiónProblemas para configurar la impresora Resolver problemas de configuraciónPaso 1 Ejecute la prueba del fax Problemas durante la instalación del softwareProblemas para configurar el fax Paso 2 Revise la lista de posibles problemas La impresora puede enviar faxes pero no recibirlos La impresora no puede enviar faxes pero sí recibirlos Después de resolver los Problemas Problemas de configuración inalámbricaReducción de la interferencia Paso 2. Compruebe la intensidad de la señal inalámbricaPaso 3 Reinicie los componentes de la red inalámbrica Paso 4 Ejecute la prueba de red inalámbricaPara abrir el EWS Uso del servidor Web incorporado EWSDeclaración de garantía limitada de Hewlett-Packard C9309-90012
Related manuals
Manual 2 pages 22.38 Kb

7500A Wide Format - E9 specifications

The HP 7500A Wide Format - E9 is a cutting-edge wide format printer designed to meet the needs of various industries, including graphic design, architecture, and engineering. Known for its exceptional print quality and versatility, this device continues to be a popular choice among professionals who require high-quality output on a variety of media.

One of the standout features of the HP 7500A is its ability to print on large-format materials up to 24 inches wide. This capability allows users to create stunning banners, posters, and technical drawings with precision and clarity. The printer employs HP's innovative Thermal Inkjet technology, which combines fast printing speeds with high-resolution output of up to 2400 x 1200 dpi. This ensures that every project benefits from sharp text and vibrant images.

Another key characteristic of the HP 7500A is its versatility regarding media compatibility. The device can handle a wide range of materials, including plain paper, glossy paper, and even heavy media such as cardstock. Users can easily switch between different types of media to accommodate diverse printing needs, making it an excellent asset for companies that require flexibility in their output.

The HP 7500A also boasts an intuitive user interface that simplifies operation. The color touchscreen display provides easy access to printer settings and job management, allowing users to monitor print jobs and make adjustments on the fly. This feature significantly enhances productivity, as users can manage their printing tasks efficiently.

Moreover, the HP 7500A is equipped with a high-capacity ink system, which reduces the frequency of ink replacements and minimizes downtime. The printer utilizes HP's pigment-based inks, which provide excellent durability and fade resistance. This ensures that prints retain their quality over time, making them ideal for both indoor and outdoor applications.

In terms of connectivity, the HP 7500A Wide Format printer supports multiple connection options, including USB and network connectivity. This allows users to easily integrate the printer into their existing workflows and share it with multiple users within an office environment.

Overall, the HP 7500A Wide Format - E9 stands out for its impressive performance, versatility, and user-friendly features. Whether creating eye-catching graphics or intricate technical drawings, this printer offers the reliability and quality that professionals demand. Its combination of advanced technologies and robust capabilities makes it a valuable addition to any design or production team.
Top Page Image Contents