HP 7500A Wide Format - E9 manual Set up and use fax

If you want to configure this setting…		…do this:
Distinctive Ring		1.	Touch right arrow	and then touch
Change the answer ring pattern for			Setup.
distinctive ring		2.	Touch Fax Setup, and then touch
	Note: If you are using a distinctive		Advanced Fax Setup.
	ring service, you can use more than	3.	Touch Distinctive Ring.
	one telephone number on the same	4.	A message appears stating that this
	telephone line. You can change
			setting should not be changed unless
	this setting to enable the printer to
			you have multiple phone numbers on
	determine automatically which ring
			the same telephone line. Touch Yes to
	pattern it should use for fax calls only.
			continue.
	Tip: You can also use the Ring Pattern
		5.	Do one of the following:
	Detection feature in the printer’s		• Touch the ring pattern assigned by
	control panel to set distinctive		your telephone company to fax calls.
	ring. With this feature, the printer		Or
	recognizes and records the ring		• Touch Ring Pattern Detection, and
	pattern of an incoming call and,		then follow the instructions on the
	based on this call, automatically		printer’s control panel.
	determines the distinctive ring pattern		Note: If you are using either a PBX
	assigned by your telephone company
			phone system that has different ring
	to fax calls.
			patterns for internal and external calls,
			you must call the fax number from an
			external number.
Fax Speed		1.	Touch right arrow	and then touch
Set the fax speed used to communicate			Setup.
between the printer and other fax machines		2.	Touch Fax Setup, and then touch
when sending and receiving faxes.			Advanced Fax Setup.
	Note: If you experience problems	3.	Touch down arrow	, and then touch
	sending and receiving faxes, try using		Fax Speed.
	a lower fax speed.	4.	Touch to touch Fast, Medium, or Slow.
Fax Error Correction Mode		1.	Touch right arrow	and then touch
If the printer detects an error signal during			Setup.
the transmission and the error-correction		2.	Touch Fax Setup, and then touch
setting is turned on, the printer can request			Advanced Fax Setup.
that a portion of the fax be resent.		3.	Touch down arrow	, and then touch
	Note: If you have problems sending
			Error Correction Mode.
	and receiving faxes, turn off error	4.	Select On or Off.
	correction. Also, turning off this setting
	might be useful when you are trying to
	send a fax to another country/region
	or receive a fax from another country/
	region or if you are using a satellite
	phone connection.
				Set up and use fax

English

11