Chapter 5
Remove a memory card
CAUTION: Do not pull out the memory card while the memory card/camera port light is flashing. A flashing light means the printer or computer is accessing the memory card. Wait until the light remains solid. Removing a memory card while it is being accessed may corrupt information on the card or damage the printer and card.
To remove a memory card
▲When the memory card/camera port light on the printer is solid, it is safe to pull the card out of the slot.
Print without a computer
Save photos from a memory card to another device
You can save photos from a memory card inserted in the printer to another device, such as a thumb drive connected to the printer, without using a computer. For information on transferring photos from a memory card to a computer, see Transfer photos to a computer.
To save photos from a memory card to another device
1.Insert a memory card and connect a storage device to the camera port.
2.Touch Save when prompted to save the photos to the storage device.
3.When prompted, remove the storage device.
Print from a PictBridge-certified camera or device
This section describes the procedure for printing from a PictBridge digital camera. The procedure for printing from other PictBridge
NOTE: If you disconnect the camera while printing, all print jobs are cancelled.
To print using a PictBridge-certified camera
1.Load HP Advanced Photo Paper into the printer.
2.Turn on the
3.Make sure the USB configuration setting of the camera is set to Digital Camera, and then connect the camera to the camera port of the printer using the USB cable that came with the
32 Print without a computer