HP A646 Inkjet CC001A#B1H manual Blank page came out of the printer, Print quality is poor

A blank page came out of the printer

Try the following solution for this problem.

Solution: Print a test page. For more information, see Print a test page. Replace the print cartridge if necessary. For more information, see Insert or replace the print cartridge.

Cause: The print cartridge may be depleted of ink.

Parts of the printed document are missing or are in the wrong place

Try the following solution for this problem.

Solution: Make sure you have selected the correct paper size. For more information, see Change the paper size.

Cause: You may have selected an incorrect paper size.

Troubleshooting

Print quality is poor

Try the following solutions to resolve the issue. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

•Solution 1: Reduce image size

•Solution 2: Use correct paper

•Solution 3: Print on correct side of paper

•Solution 4: Clean print cartridge

•Solution 5: Replace print cartridge, if necessary

Solution 1: Reduce image size

Solution: Reduce the size of the image and try printing again. For better results in the future, set the digital camera to a higher photo resolution.

Cause: You may have selected a low-resolution setting on the digital camera. If this did not solve the issue, try the next solution.

Solution 2: Use correct paper

Solution: Make sure you are using a paper type intended for the printer. Use HP- designed photo paper for best results when printing photos.

Choose paper that is specifically designed for the output rather than plain paper. Use HP Advanced Photo Paper for best results when printing photos.

Cause: You may not be using the best paper type for the output. If this did not solve the issue, try the next solution.

Printing and hardware issues 75