plan to use immediately. When you have finished printing, return any unused photo paper to the plastic bag. This will prevent the photo paper from curling.
For more information, see:
•“Load media” on page 23
•“Paper basics” on page 21
Cause: The wrong kind of paper was loaded in the input tray.
Printouts are slanted or skewed
Try the following solutions if your printout does not appear straight on the page.
•Solution 1: Make sure the paper is loaded correctly
•Solution 2: Make sure only one type of paper is loaded
Solution 1: Make sure the paper is loaded correctly
Solution: Make sure that the paper is loaded correctly in the input tray. For more information, see:
“Load media” on page 23
Cause: The paper was not loaded correctly.
If this did not solve the issue, try the next solution.
Solution 2: Make sure only one type of paper is loaded
Solution: Load only one type of paper at a time.
Cause: More than one type of paper was loaded in the input tray.
If this did not solve the issue, try the next solution.
Solve a problem
Ink streaks on the back of the paper
Try the following solutions if there is smeared ink on the back of your printout.
•Solution 1: Print on a page of plain paper
•Solution 2: Wait while the ink dries
Solution 1: Print on a page of plain paper
Solution: Print one or several pages of plain paper to soak up any excess ink in the product.
To remove excess ink using plain paper
1.Load several sheets of plain paper in the input tray.
2.Wait five minutes.
Print quality troubleshooting | 67 |