Specifications
Heating Specifications
Heat Output1 | 48,000 BTU/hr. |
| |
Heating Capacity2 | 800 - 2,000 sq. ft. | ||
Fuel Burn Rate3 | 2.0 - 6.0 lbs./hr. |
| |
Burn Time (lowest setting) | 5500 | - 60 hrs. | 5500XL - 160 hrs. |
Hopper Capacity | 5500 | - 150 lbs. | 5500XL - 320 lbs. |
1BTU output will vary depending on the quality of fuel. Use PFI listed fuels for the best results.
2Heating capacity will vary depending on floor plan layout of your home, degree of insulation, and the outside temperature.
3Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
Dimensions
| 5500 | 5500XL |
Height | 34 in. | 47 1/4 in. |
|
|
|
Width | 26 in. | 26 hrs. |
Depth | 25 in. | 25 hrs. |
|
|
|
Weight | 250 lbs. | 275 hrs. |
Electrical Specifications
Electrical Rating | |
|
|
Watts (operational) | 175 (approx.) |
|
|
Watts (igniter running) | 425 (approx.) |
|
|
FUEL CONSIDERATIONS
Your King/Ashley stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel Industries standards. (Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than 8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced performance.
SAFETY AND EPA COMPLIANCE
Your King/Ashley stove has been safety tested and listed to ASTM E 1509, (UM)
4 | USSC |