HP DreamColor Z24x Professional Display manual

Page 17

3.Depending on your configuration, connect either the DisplayPort, DVI, or HDMI video cable between the PC and the monitor.

NOTE: The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected through the On- Screen Display (OSD) feature by pressing one of the five front bezel buttons to activate the buttons, and then press the bottom Open Menu button to open the OSD. In the OSD select Video Input and choose the desired input source.

●For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort IN connector on the rear of the monitor and the other end to the DisplayPort connector on the computer (cable provided).

NOTE: You must connect the DisplayPort cable to the DisplayPort IN connector, not the DisplayPort OUT connector. The monitor will not function if you connect the cable between the DisplayPort OUT connector and the computer.

Connecting the Cables

9

Image 17

Contents HP DreamColor Z24x Display Hewlett-Packard Development Company, L.P About This Guide Iv About This Guide Table of contents Z24x Model Recognizing Preset Display Resolutions Vii Viii Z24x Display Product FeaturesPage Important Safety Information Safety and Maintenance GuidelinesShipping the Monitor Maintenance GuidelinesCleaning the Monitor Use Caution When Setting Up the Monitor Setting Up the MonitorInstalling the Stand Component Function Rear ComponentsConnecting the Cables Page Page Page Page Front Panel Controls Adjusting the Monitor Page Setting Up the Monitor Turning on the Monitor HP Watermark and Image Retention Policy Connecting USB DevicesRemoving the Monitor Stand Mounting the Monitor Page Page Page Locating the Information Card Locating the Serial Number and Product NumberInstalling a Cable Lock Software and Utilities Operating the MonitorInformation File Image Color Matching FileUsing Picture-in-Picture PIP and Picture-beside-Picture PBP Installing the .INF and .ICM FilesInstalling from the Disc Downloading from the InternetDisplayPort Multistreaming Changing the Bezel Button Functions Adjusting the Bezel Button LEDsUsing Auto-Sleep Mode Using the On-Screen Display Menu Level DVI Hdmi Primary / PIP Source Information Operating the Monitor Back Factory Reset Color Management Color PresetsColor Calibration Factory Color Calibration UserAuto Edid Update Z24x Model Technical SpecificationsPreset Pixel Format Aspect Ratio Vert Freq Hz Pixel Clk MHz Recognizing Preset Display ResolutionsSolving Common Problems Support and TroubleshootingPreparing to Call Technical Support Product SupportPage Federal Communications Commission Notice Agency Regulatory NoticesModifications CablesEuropean Union Regulatory Notice Canadian NoticeAvis Canadien German Ergonomics Notice Japanese Notice Korean Notice Power Cord Set RequirementsJapanese Power Cord Requirements Materials Disposal Product Environmental NoticesEnergy Star Qualification Product Environmental Notices Ukraine Restriction of Hazardous Substances Turkey EEE RegulationLCD Monitor Quality and Pixel Policy