3Setting Up the Pump(s)
3.3.3 Attaching a Single Pump to an Adapter Plate
Refer to Figures 3-8 through 3-11 and Figure C.
ALIGNMENT PINS
MOTOR SHAFT
THREADED
HOLES
TO MOUNT
ADAPTER
PLATE TO
VENDOR
MOTOR (4X)
ALIGNMENT
PINS FOR
PUMP (2X)
MOUNTING
HOLES
VENDOR
MOTOR
ADAPTER PLATE
CLEARANCE HOLES
FOR VENDOR MOTOR
ALIGNMENT PINS (2X)
Figure 3-8. Mounting the Adapter Plate Figure 3-9. Pump in Closed Position
TOP ALIGNMENT
PIN
FACE OF |
|
MOTOR | MOUNTING |
BOTTOM | HOLES |
| |
ALIGNMENT PIN |
|
ROTOR SHAFT | ADAPTER |
| PLATE |
FLAT HEAD 
SCREWDRIVER
Figure 3-10. Aligning the Pump with the Plate
STANDARD |
MOUNTING |
SCREWS |