Omega Vehicle Security FPU500 manual Loading the Tubing, Opening the Stator

5Operating the Pump

5.2 Loading the Tubing

NOTE

Before you load the tubing in the pump, make sure that power to the motor is turned off and that the rotor has come to a complete stop. The rotor is partially exposed when the pump is in the open position.

Follow this procedure (refer to Figures 5-1 through 5-4 and Figure D):

Figure 5-1. Opening the Stator Figure 5-2. Loading the Tubing

Figure 5-3. Closing the Stator Figure 5-4. Adjusting the Clamp Screw

5-2