Baumatic BC190.2TCSS manual Energy saving tips, Minimum Maximum Diametre

Page 21

oOnce the burner is lit, turn the control knob to your required setting between the maximum and minimum setting symbols.

oTo turn the burner off, turn the control knob fully anti-clockwise to the gas off position.

oIn case of power failure, the burners can be lit by carefully using a match.

Energy saving tips

BURNERS

PANS

 

Minimum

Maximum

 

diametre

diametre

Wok

220 mm

260 mm

Rapid

180 mm

260 mm

Semi-rapid

140 mm

260 mm

Auxiliary

120 mm

140 mm

oThe diametre of the bottom of the pan should correspond to that of the burner.

oThe burner flame must never extend beyond the diametre of the pan.

oUse flat bottomed pans only

oWhen possible, keep a lid on the pan whilst cooking.

o Cook vegetables with as little water as possible, to reduce cooking times.

IMPORTANT: Always place pans centrally over the hob burners and position them so that the handles cannot get accidentally caught or knocked off. You should also make sure that the handle is not over one of the other hob burner flames.

21

Image 21
Contents KirThat1 BC190.2TCSS Contents Environmental note General Information Important safety informationGeneral Safety Child SafetyBecome hot during use and retain heat after operation Do not Leave the Appliance Unattended Whilst in USEPage Cleaning InstallationDeclaration of conformity Product dimensions SpecificationsProduct specifications Burner gas hobRated Voltage Flame failure device on each burner o Gas oven with grillSupply Connection Fuse Rating Mains Supply LeadControl Panel Main oven and grill control knob Hob control knobsMinute minder control knob Using your gas range cooker Switching the gas oven onBefore first use Switching the gas grill on Fitting the grill deflector Oven light Using the minute minderCooking guidelines Gas mark temperatures Gas mark number Temperature CShelf levels Base burner appliances Cooking table Temperature C Shelf Approximate Position Cooking time MeatFish PastryAutomatic ignition with flame failure safety device Using the hob topMinimum Maximum Diametre Energy saving tipsCleaning and maintenance Maintaining the cast iron pan stands Cleaning the hob burnersReplacing the oven bulb Removing the oven door for cleaningRemoving the inner door glass for cleaning Reset the Movable HooksPositioning InstallationPage Page Gas connection Important informationVentilation requirements Gas Safety Installation and Use Regulations Gas connection Gas adjustment Conversion to LPG for the hob top Minimum flow adjustment for hob gas taps Important On completion carry out a gas tightness test Gas adjustment Conversion to LPG for the oven and grillMinimum flow adjustment for the oven and grill burners Fitting a stability chain Electrical connection Connecting the mains supply cable Switch the appliance off at the control switchReplacing the mains supply cable My appliance isn’t working correctly Do not Attempt to Repair the Appliance Yourself Baumatic Consumables Sales Telephone