Baumatic BC190.2TCSS manual Minimum flow adjustment for the oven and grill burners

Page 35

oLoosen the burner screw (V) and then carefully pull the burner away from its support. IMPORTANT: Care must be taken to ensure that no damage is caused to the ignition plug or the thermocouple.

oUnscrew the injector using a 10 mm spanner and replace it with the stipulated injector for the new gas supply (see table below).

Burner	Types	Pressure	Injector	Gas			Power
	of gas	(mbar)	Marking	consumption			(kW)
			(1/100	g/h		l/h	Max.	Min.
			mm)
Oven	Natural	20	150	-		429	4.50	2.00
	(G20)
	Butane	28	95-X	218		-
	(G30)
	Propane	37	95-X	214		-
	(G31)
Grill	Natural	20	115	-		191	2.00	N/A
	(G20)
	Butane	28	68	145		-
	(G30)
	Propane	37	68	143		-
	(G31)

IMPORTANT: You must change the oven and grill injectors.

IMPORTANT: After changing the injectors YOU MUST follow the minimum flow adjustment section below.

Minimum flow adjustment for the oven and grill burners

All work must be carried out by a GASSAFE registered engineer.

oLight the burner and set the knob at the minimum position.

o Remove the knob from the tap and place a small bladed screwdriver in the screw indicated in the picture opposite.

o Unscrew the adjusting screw, in order to increase the gas flow or tighten the adjusting screw to decrease the gas flow.

35

Image 35

Contents KirThat1 BC190.2TCSS Contents Environmental note General Information Important safety informationDo not Leave the Appliance Unattended Whilst in USE Child SafetyGeneral Safety Become hot during use and retain heat after operationPage Declaration of conformity CleaningInstallation Burner gas hob SpecificationsProduct dimensions Product specificationsFuse Rating Mains Supply Lead Flame failure device on each burner o Gas oven with grillRated Voltage Supply ConnectionMinute minder control knob Control Panel Main oven and grill control knobHob control knobs Before first use Using your gas range cookerSwitching the gas oven on Switching the gas grill on Fitting the grill deflector Oven light Using the minute minderCooking guidelines Shelf levels Gas mark temperaturesGas mark number Temperature C Base burner appliances Pastry Temperature C Shelf Approximate Position Cooking time MeatCooking table FishAutomatic ignition with flame failure safety device Using the hob topMinimum Maximum Diametre Energy saving tipsCleaning and maintenance Maintaining the cast iron pan stands Cleaning the hob burnersReplacing the oven bulb Removing the oven door for cleaningRemoving the inner door glass for cleaning Reset the Movable HooksPositioning InstallationPage Page Ventilation requirements Gas connectionImportant information Gas Safety Installation and Use Regulations Gas connection Gas adjustment Conversion to LPG for the hob top Minimum flow adjustment for hob gas taps Important On completion carry out a gas tightness test Gas adjustment Conversion to LPG for the oven and grillMinimum flow adjustment for the oven and grill burners Fitting a stability chain Electrical connection Replacing the mains supply cable Connecting the mains supply cableSwitch the appliance off at the control switch My appliance isn’t working correctly Do not Attempt to Repair the Appliance Yourself Baumatic Consumables Sales Telephone