BAUMATIC BDW13, BDW14 dishwasher user manual | 12 |
STARTING A WASH CYCLE
P
1)MAKE SURE THAT YOUR DISHWASHER’S PLUG HAS BEEN PUSHED ALL THE WAY INTO THE WALL SOCKET.
2)MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3)LOAD YOUR DISHWASHER (SEE THE SECTION ENTITLED ‘LOADING YOUR DISHWASHER’, PAGES
4)POUR IN DETERGENT (SEE THE SECTION ENTITLED ‘SALT, DETERGENT & RINSE AID’), PAGES
5)OPEN THE DOOR, PRESS THE ‘ON/OFF’ BUTTON AND THE ‘ON/OFF’ LIGHT WILL COME ON.
6)PRESS THE ‘P’ KEY (PROGRAM KEY) TO SELECT THE ‘WASH CYCLE’. SEE TABLE ON NEXT PAGE FOR WASH CYCLE TYPES.
7)CLOSE THE DOOR. THE WASHING WILL START AFTER APPROXIMATELY TEN SECONDS.
****Note: When you turn your dishwasher on, the number ‘OO’ should show on the display. If you see any other digits, such as ‘17’ or ‘01’, ‘02’, ‘03’, etc., please refer to the
*REMEMBER *: YOU CAN PROGRAM YOUR DISHWASHER UP TO 24 HOURS IN
ADVANCE BY PRESSING THE DELAY BUTTON MULTIPLE TIMES UNTIL THE
DESIRED DELAY HAS BEEN SET.
* Note: Each time you press the delay timer key, you will move the start of your wash cycle forward by one hour.
.
Delay Timer Key (7)
Approximate Timing of Wash Cycles
Intensive | Normal | Economy | Rinse | Glass | Rapid | Soap | |
(strong) | 133 | 112 | 106 | 51 | 73 | 48 | 7 |
mins. | mins. | mins. | mins. | mins. | mins. | mins. | |
12