ASRock K10N78hSLI-GLAN manual Install Windows XP / XP 64-bit OS on your system

Page 36

Please insert a floppy diskette into the floppy drive. Select your required item on the list according to the mode you choose and the OS you install. Then press any key.

E.The system will start to format the floppy diskette and copy SATA / SATAII drivers into the floppy diskette.

STEP 3: Set Up BIOS.

Please follow step 1 to set up the BIOS option “SATA Operation Mode” to [AHCI].

STEP 4: Install Windows® XP / XP 64-bit OS on your system.

You can start to install Windows® XP / XP 64-bit on your system. At the beginning of Windows® setup, press F6 to install a third-party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing the NVIDIA® AHCI driver. After reading the floppy disk, the drivers will be presented. Select the driver to install according to the OS you install. The drivers are as below:

A. NVIDIA nForce Storage Controller (required) Windows XP

B. NVIDIA nForce Storage Controller (required) Windows XP64

Please select A for Windows® XP in AHCI mode. Please select B for Windows® XP 64-bit in AHCI mode.

Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug functions

STEP 1: Set Up BIOS.

 

A.

Enter BIOS SETUP UTILITY Advanced screen

IDE Configuration.

B.Set the “SATA Operation Mode” option to [non-RAID].

STEP 2: Install Windows® XP / XP 64-bit OS on your system.

2.15.2 Installing Windows® VistaTM / VistaTM 64-bit Without RAID Functions

If you want to install Windows® VistaTM / Windows® VistaTM 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions

STEP 1: Set Up BIOS.

 

A.

Enter BIOS SETUP UTILITY Advanced screen

IDE Configuration.

B.Set the “SATA Operation Mode” option to [AHCI].

STEP 2: Install Windows® VistaTM / VistaTM 64-bit OS on your system.

Insert the Windows® VistaTM / Windows® VistaTM 64-bit optical disk into the optical drive to boot your system, and follow the instruction to install Windows® VistaTM / Windows® VistaTM 64-bit OS on your system. When you see “Where do you want to install Windows?

page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the NVIDIA® AHCI drivers. NVIDIA® AHCI drivers are in the following path in our Support CD:

36

Image 36
Contents K10N78hSLI-GLAN Copyright Notice DisclaimerContents Bios Setup Utility Software SupportPackage Contents IntroductionSpecifications Bios Feature Unique FeatureSupport CD HardwarePage Page CPU Motherboard Layout DDR2ASRock eSATAIISPDIF I/O Table for Audio Output ConnectionInstallation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Dual Channel Memory ConfigurationsInstalling a Dimm Notch breakInstalling an expansion card Expansion Slots PCI and PCI Express SlotsMinimum System Configuration for Hybrid Slitm Hybrid Slitm Operation GuideSupported PCI Express Card for Hybrid Slitm Enjoy the benefit of Nvidia Hybrid Slitm Jumpers Setup PS2USBPW1Onboard Headers and Connectors IDE1Serial ATA Sata Power Cable Header CPU Fan Connector White end 2-pin Hdmispdif Header Connection Guide What is eSATAII? ESATAII Interface IntroductionHow to install eSATAII? Comparison between eSATAII and other devices Sataii Hard Disk Setup Guide Western DigitalPage What is Hot Plug Function? What is Hot Swap Function?Sata / Sataii HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a Sata / Sataii HDD How to Hot Unplug a Sata / Sataii HDDDriver Installation Guide Installing Windows XP / XP 64-bit Without RAID FunctionsMake a Sata / Sataii driver diskette Install Windows XP / XP 64-bit OS on your system Install Windows VistaTM / VistaTM 64-bit OS on your systemInstalling Windows XP / XP 64-bit With RAID Functions Use RAID Installation Guide to set RAID configuration\ RAID Installation Guide \ I386 \ AHCIVista For Windows VistaTM OSSet the Sata Operation Mode option to RAID Untied Overclocking Technology Bios Menu Bar IntroductionNavigation Keys Main ScreenTo jump to the Exit Screen or exit the current screen System Time HourMinuteSecondMonitor Boot Security Exit CPU ConfigurationAdvanced Screen MainOverclock Mode Boot Failure GuardAM2 Boost CPU Frequency MHzSecure Virtual Machine Enhanced Halt StateProcessor Maximum Frequency North Bridge Maximum FrequencyProcessor Voltage Processor Target FrequencyNorth Bridge Target Frequency CPU Frequency MultiplierMemory Controller Mode Flexibility OptionCAS Latency CL Addr/Cmd Fine Delay CS/ODT Fine DelayMA Timing Bank InterleavingFront Panel Hybrid SLIShare Memory Primary Graphics AdapterCPU NB Link Speed CPU NB Link WidthDram Voltage Chipset Core VoltageAcpi Configuration Sata Operation Mode IDE Device ConfigurationAcpi Hpet Table OnBoard IDE ControllerLBA/Large Mode PIO ModeDMA Mode Block Multi-Sector TransferPCIPnP Configuration PCI Latency TimerA.R.T 32Bit Data TransferFloppy Configuration Super IO ConfigurationOnBoard Floppy Controller Serial Port AddressUSB Configuration USB Controller EnabledUSB Controller USB 2.0 SupportTarget CPU Temperature Hardware Health Event Monitoring ScreenCPU Quiet Fan Target Fan SpeedBoot Screen Boot Settings ConfigurationBoot From Onboard LAN Boot Up Num-LockMain Advanced Monitor Boot Change Supervisor PasswordSecurity Screen Load Optimal Defaults Exit ScreenSave Changes and Exit Discard Changes and ExitInstall Operating System Support CD InformationRunning The Support CD Drivers Menu