ASRock K10N78hSLI-GLAN Secure Virtual Machine, Enhanced Halt State, Processor Maximum Frequency

Page 44

Secure Virtual Machine

This option appears only when you adopt AM2 CPU. When this option is set to [Enabled], a VMM (Virtual Machine Architecture) can utilize the additional hardware capabilities provided by AMD-V. The default value is [Enabled]. Con- figuration options: [Enabled] and [Disabled].

Enhanced Halt State

C1E is an enhanced power saving state which is supported by AM2 dual core and AM2+ multi-core processors. The processor will enter C1E power saving state when both of its cores transition into the C1 state. The default value is [Disabled]. Configuration options: [Enabled] and [Disabled].

Processor Maximum Frequency

It will display Processor Maximum Frequency for reference.

North Bridge Maximum Frequency

This option appears only when you adopt Phenom CPU. It will display North Bridge Maximum Frequency for reference.

Processor Maximum Voltage

It will display Processor Maximum Voltage for reference.

Multiplier/Voltage Change

This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Frequency and Processor Voltage. However, it is recom- mended to keep the default value for system stability.

BIOS SETUP UTILITY

 

 

Advanced

 

 

 

CPU Configuration

 

Select the over clock

 

 

Overclock Mode

[Auto]

mode.

 

 

 

CPU Frequency (MHz)

[200]

 

 

PCIE Frequency (MHz)

[100]

 

 

CPU/LDT Spread Spectrum

[Enabled]

 

 

[Enabled]

 

 

SATA Spread Spectrum

 

 

Boot Failure Guard

[Enabled]

 

 

Cool' n' Quiet

[Auto]

 

 

Enhanced Halt State

[Disabled]

 

 

Processor Maximum Frequency

2300 MHz

 

Select Screen

North Bridge Maximum Frequency 1800 MHZ

 

Select Item

Processor Maximum Voltage

1.2500 V

+-

Change Option

Multiplier/Voltage Change

[Manual]

F1

General Help

Processor Target Frequency

2300 MHz

F9

Load Defaults

North Bridge Target Frequency

1800 MHZ

F10

Save and Exit

 

 

 

 

ESC

Exit

v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.

Processor Frequency

This option appears only when you adopt AM2 CPU. This item will show when “Multiplier/Voltage Change” is set to [Manual]; otherwise, it will be hidden. The range of the value depends on the CPU you adopt on this motherboard. However, for system stability, it is not recommended to adjust the value of this item.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents K10N78hSLI-GLAN Copyright Notice DisclaimerContents Bios Setup Utility Software SupportPackage Contents IntroductionSpecifications Bios Feature Unique FeatureSupport CD HardwarePage Page CPU Motherboard Layout DDR2ASRock eSATAIISPDIF I/O Table for Audio Output ConnectionInstallation Pre-installation PrecautionsCPU Installation Installation of CPU Fan and HeatsinkInstallation of Memory Modules Dimm Dual Channel Memory ConfigurationsInstalling a Dimm Notch breakInstalling an expansion card Expansion Slots PCI and PCI Express SlotsSupported PCI Express Card for Hybrid Slitm Minimum System Configuration for Hybrid SlitmHybrid Slitm Operation Guide Enjoy the benefit of Nvidia Hybrid Slitm Jumpers Setup PS2USBPW1Onboard Headers and Connectors IDE1Serial ATA Sata Power Cable Header CPU Fan Connector White end 2-pin Hdmispdif Header Connection Guide What is eSATAII? ESATAII Interface IntroductionHow to install eSATAII? Comparison between eSATAII and other devices Sataii Hard Disk Setup Guide Western DigitalPage What is Hot Plug Function? What is Hot Swap Function?Sata / Sataii HDD Hot Plug Feature and Operation Guide Points of attention, before you process the Hot PlugHow to Hot Plug a Sata / Sataii HDD How to Hot Unplug a Sata / Sataii HDDMake a Sata / Sataii driver diskette Driver Installation GuideInstalling Windows XP / XP 64-bit Without RAID Functions Install Windows XP / XP 64-bit OS on your system Install Windows VistaTM / VistaTM 64-bit OS on your systemInstalling Windows XP / XP 64-bit With RAID Functions Use RAID Installation Guide to set RAID configuration\ RAID Installation Guide \ I386 \ AHCIVista For Windows VistaTM OSSet the Sata Operation Mode option to RAID Untied Overclocking Technology Bios Menu Bar IntroductionNavigation Keys Main ScreenTo jump to the Exit Screen or exit the current screen System Time HourMinuteSecondMonitor Boot Security Exit CPU ConfigurationAdvanced Screen MainOverclock Mode Boot Failure GuardAM2 Boost CPU Frequency MHzSecure Virtual Machine Enhanced Halt StateProcessor Maximum Frequency North Bridge Maximum FrequencyProcessor Voltage Processor Target FrequencyNorth Bridge Target Frequency CPU Frequency MultiplierCAS Latency CL Memory Controller ModeFlexibility Option Addr/Cmd Fine Delay CS/ODT Fine DelayMA Timing Bank InterleavingFront Panel Hybrid SLIShare Memory Primary Graphics AdapterCPU NB Link Speed CPU NB Link WidthDram Voltage Chipset Core VoltageAcpi Configuration Sata Operation Mode IDE Device ConfigurationAcpi Hpet Table OnBoard IDE ControllerLBA/Large Mode PIO ModeDMA Mode Block Multi-Sector TransferPCIPnP Configuration PCI Latency TimerA.R.T 32Bit Data TransferFloppy Configuration Super IO ConfigurationOnBoard Floppy Controller Serial Port AddressUSB Configuration USB Controller EnabledUSB Controller USB 2.0 SupportTarget CPU Temperature Hardware Health Event Monitoring ScreenCPU Quiet Fan Target Fan SpeedBoot Screen Boot Settings ConfigurationBoot From Onboard LAN Boot Up Num-LockSecurity Screen Main Advanced Monitor BootChange Supervisor Password Load Optimal Defaults Exit ScreenSave Changes and Exit Discard Changes and ExitInstall Operating System Support CD InformationRunning The Support CD Drivers Menu
Top Page Image Contents