Chapter 3
▶RapidStart Display Save/Restore [Enabled]
Enables or disables the Intel Rapid Start Display screen to be saved or restored. The screen will be saved before the system enters sleep mode. Then the system will restore the screen when wakened.
[Enabled] | Enables this function. |
[Disabled] | Disables this function. |
▶RapidStart Display Type [BIOS
Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore] | The BIOS POST splash screen will be saved/ restored. |
[DeskTop Save/Restore] | The desktop image will be saved/ restored. |
▶LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears when a installed CPU supports this function and "Intel
[Enabled] | Enhance the dynamic IO load adjusted performance for accelerating |
| the SSD speed. |
[Disabled] | Disables this feature. |
▶USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the sub- menu.
▶USB Controller [Enabled]
Enables or disables the onboard USB controller.
▶Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] | The system will automatically detect if any USB device is connected |
| and enables or disables the legacy USB support. |
[Enabled] | Enable the USB support for legacy operating systems that do not |
| support USB. |
[Disabled] | The USB devices are available only for UEFI applications. |
▶Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter> to enter the
▶Serial
(COM) Port 0 Configuration
Sets detailed configuration of serial(COM) port 0. Press <Enter> to enter the sub- menu.
▶Serial
(COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
▶Serial
(COM) Port 0 Settings [Auto]
Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ automatically or you can set it manually.
▶Parallel
(LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press <Enter> to enter the sub- menu.
▶Parallel
(LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
BIOS Setup |