▶Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch. Once the chassis is opened, the system will record and issue a warning message. To clear the warning message, set the item to [Reset], then it will return to [Enabled] later. [Options: Disabled, Enabled, Reset]
Save & Exit
▶Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes and exit BIOS setup.
▶Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶Save Changes
This item is used to save current changes.
▶Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
▶Boot Override
The installed
Chapter 3
BIOS Setup |