Advanced
▶PCI Subsystem Settings
Sets PCI Express interface protocol and latency timer. Press <Enter> to enter the
▶PEG0/ 1 - Gen X [Auto]
Sets PCI Express protocol for matching different installed devices. PEG0, PEG1 are as first and second PCIe x16 slots.
[Auto] | Enables all PCIe Gen1, Gen2 and Gen3. supports. |
[Gen1] | Enables PCIe Gen1 support only. |
[Gen2] | Enables PCIe Gen2 support only. |
[Gen3] | Enables PCIe Gen3 support only. |
▶ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the
▶Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] | The power LED turns to another color to indicate the S3 state. |
[Blinking] | The power LED blinks to indicate the S3 state. |
▶Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press <Enter> to enter the
▶Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
▶LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings. This item will appear when "Onboard LAN Controller" is enabled.
[Enabled] | Enables the onboard LAN Boot ROM. |
[Disabled] | Disables the onboard LAN Boot ROM. |
▶Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] | Enables UEFI network stack. |
[Disabled] | Disables UEFI network stack. |
▶Ipv4 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv4 protocol. This item will appear when “Network Stack” is enabled.
[Enabled] | Enables the Ipv4 PXE boot support. |
[Disabled] | Disables the Ipv4 PXE boot support. |
Chapter 3
BIOS Setup |