MSI H87M-G43 manual Next Boot

Page 76

Chapter 3

[Next Boot]

CPU will run the adjusted CPU base clock after reboot.

[Immediate]

CPU runs the adjusted CPU base clock immediately.

CPU Ratio Mode [Auto]

Selects the CPU Ratio operating mode.

[Auto]

This setting will be configured automatically by BIOS.

[Fixed Mode]

Fixes the CPU ratio.

[Dynamic Mode]

CPU ratio will be changed dynamically according to the CPU

 

loading.

Adjust CPU Ratio [Auto]

Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.

Adjusted CPU Frequency

Shows the adjusted CPU frequency. Read-only.

EIST [Enabled]

Enables or disables the Enhanced Intel® SpeedStep Technology.

IntelTurbo Boost [Enabled]

Enables or disables the Intel® Turbo Boost. This item appears when the installed CPU supports this function.

[Enabled]

Enables this function to boost CPU performance automatically above

 

rated specifications when system request the highest performance

 

state.

[Disabled]

Disables this function.

EnhancedTurbo [Auto]

Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance.

[Auto]

This setting will be configured automatically by BIOS.

[Enabled]

All CPU cores would be increased to maximum turbo ratio.

[Disabled]

Disables this function.

OC Genie Switch [Gear1]

Selects a kind of overclocking profiles for OC Genie Function. This item appears when "OC Genie Function Control" sets to [By BIOS Options].

[Gear1]

Enables Gear1 overclocking profile for overclocking.

[Gear2]

Enables Gear2 overclocking profile for extreme overclocking.

Important

We recommend that you do not to make any modification in OC menu and do not to load defaults after enabling the OC Genie function.

Updating BIOS or clearing CMOS is not allowed in OC Genie mode, and it may cause OC Genie function fail or other effect.

Adjust Ring Ratio [Auto]

Sets the ring ratio. The valid value range depends on the installed CPU.

BIOS Setup

3-18

Image 76
Contents Preface G52-78231X1Preface Smartphone Application Technical Support Safety Instructions IT MAY Damage the EquipmentVoir LA Notice D’INSTALLATION Avant DE Raccorder AU Reseau FCC-B Radio Frequency Interference StatementKorea Warning Statements Battery Information Weee Waste Electrical and Electronic Equipment Statement Español Türkçe Contents Quick Installation OC Profile Hardware MonitorAppendix a Intel SBA optional Page Chapter Packing Contents Optional AccessoriesAssembly Precautions CPU Motherboard SpecificationsUSB Uefi AMI Bios BiosLAN MSI Connectors Quick Guide Connectors Reference Guide Back Panel Quick Guide HDMI+VGA HDMI+DVI CPU Central Processing Unit Introduction to the LGA 1150 CPUCPU & Heatsink Installation Video DemonstrationChapter Chapter Dual -Channel mode Population Rule MemoryMounting Screw Holes Power Supply JPWR1~2 ATX Power ConnectorsJPWR2 JPWR1Expansion Slots PCIE1~4 PCIe Expansion SlotsSingle Video Card Installation Video/ Graphics CardsAMD CrossFire Multi -GPU Technology Chapter Internal Connectors SATA1~6 Sata ConnectorsSATA2 SATA4 SATA6 SATA3 SATA5 SATA1CPUFAN1,SYSFAN1~2 Fan Power Connectors JFP2 JFP1, JFP2 System Panel ConnectorsJFP1 JUSB1~3 USB 2.0 Expansion Connectors JUSB4 USB 3.0 Expansion Connector JAUD1 Front Panel Audio ConnectorJTPM1 TPM Module Connector JCOM1 Serial Port ConnectorJLPT1 Parallel Port Connector JCI1 Chassis Intrusion ConnectorJumpers JBAT1 Clear Cmos JumperTotal Installer Drivers and UtilitiesQuick Installation CPU Installation Chapter Memory Installation Motherboard Installation Chapter Power Connectors Installation Chapter Sata HDD Installation MSATA SSD Installation JFP1 Connector Installation Front Panel Connector InstallationFront Panel Audio Connector Installation USB2.0 Connector Installation Peripheral Connector InstallationUSB3.0 Connector Installation Graphics Card Installation Chapter Bios Setup Entering Bios Setup Entering SetupPress DEL key to enter Setup Menu, F11 to enter Boot Menu Overview Bar Operation Settings System StatusAdvanced IGD PEGPartition size must be larger then the amount of memory SSD speed SPP ECPRequirement Boot settings Events Boot SecurityUefi LEGACY+UEFISave & Exit This setting will be configured automatically by Bios Next Boot Profile Booting to accelerate the system booting time Over-current protection MEMORY-Z Enabled Enables Intel AES support Disabled SSD speed Flash OC Profile Hardware Monitor Chapter Appendix a Appendix a PrerequisitesSoftware Configuration Installing Intel SBASoftware panel overview Password settings Help ButtonAppendix B Appendix B IntroductionUsing Intel Rapid Storage Technology Option ROM XXX.X GB Appendix B XXXX-XXXXXXXX Press Y key to accept the volume deletion XXXX-XXXXXXXX Recovery Volume Options Degraded RAID Array Main MenuAppendix B System Acceleration optional Appendix B RST Synchronization optional Disk Port