Teka IRX 635 Stop Function Models IRX... and IQX, Double or Triple Circuit hotplates models TRX

Page 22

GB

Unlocking to cook

To unlock the control and use the applian- ce, follow these steps:

1 Touch the Power sensor button (6) and the sensor button of the front right heating element (3) at the same time.

The L will disappear from the indicators and a 0 with a flashing decimal point (11) will appear, or an H will appear if the corresponding heating element is hot, and the hob will be ready to be used for coo- king. When the control panel is disconnec- ted using the on/off sensor button (1), the safety function will reactive and will appear again the next time the touch con- trol panel is activated.

Cancelling the safety function

The safety function can be deactivated permanently by following these steps:

1 Touch the Power sensor button (6) and the sensor button of the front right heating element (3) at the same time.

2 Immediately afterward, touch the Power

sensor button (6).

For the operation to be carried out, no other sensor button should be touched in the following 10 seconds. If the operation is not carried out correctly, the touch con- trol panel will remain locked and will turn off after 20 seconds.

When the on/off sensor (1), is used to reactivate the control panel after cance- lling the safety function, the hob will be ready to be used for cooking.

Stop Function

(models IRX... and IQX...)

By using this function, it is possible to make a pause during the cooking process. If the timer function is also activated, it will also be paused.

Activating the Stop function

1 The cookware is located on the cooking zones, which are working at a certain level.

2 Touch the Stop sensor button (7) for one second. The function will be pau- sed.

The symbol will appear in the indicators of the heating elements, and the error messages, residual heat, fast heat-up or lack of cookware indicators, will also disappear until the function has been deactivated.

Deactivating the Stop function

1 Touch the Stop sensor button (7) and then touch any other sensor button within 10 seconds.

The heating element will go back to how it was before the Stop function was activated.

The second sensor button must be tou- ched within 10 seconds; otherwise, the hob will disconnect. If cooking has not been restarted 10 minutes after the pause, the appliance will turn off.

Double or Triple Circuit hotplates (models TRX...)

Double and triple circuit heating elements make it possible to use the inner ring or, also, the outer ring(s), depending on the

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents TRX 645 TRX 635 IRX IRX 635 IQX 645 IQX InduktionskochfeldPage Contents / Inhalt / Table des matières / / Tartalomjegyzék Présentation Utilisation et MaintenanceInstructions dutilisation de la Commande tactile Information techniqueMűszaki adatok 127 Termékismertető Használati útmutató 123 Beszerelés124 Használat és karbantartás 128Introduction / Allgemeines / Présentation / Termékismertető Hinweise zum KochgeschirrAz indukciós főzőlaphoz használandó edén- yekről DE Modell IRX Model IRXFR Modèle IRX Model IRX DE Modell IQX Model IQXFR Modèle IQX Model IQX DE Modell TRX Model TRXFR Modèle TRX Modell TRX Modèle TRXGB Guide to Using the Instructions Booklet Installation with a Cutlery Drawer or LOW Cupboard InstallationPositioning the hobs Fixing the hob Connecting the electricityInstallation with a Thermoventi Lated Oven Under the HOBPage GB Technical Information Technical dataConfiguration Electrical dataTouch control panel user Instructions Use and MaintenanceSpecial requirements before First use Models TRX Models IRX... and IQXTurning on the Appliance Activating the Heating ElementsTurning OFF a Heating Element Safety Function Models IRX... and IQXLocking the sensor buttons Hob Turning OFF ALL of the Heating ElementsStop Function Models IRX... and IQX Double or Triple Circuit hotplates models TRXDisconnecting / Turning OFF the Double Circuit Energy supplied according to Power level chosenRecovery Function Models IRX… and IQX Disconnecting / Turning OFF the Triple Circuit Model TRXLevel Duration of Heat-Up Selected Seconds Modifying the Power Level During the Fast HEAT-UPHeat-up function Automatic start of cooking Turning on the Fast HEAT-UP FunctionDisconnecting the Fast HEAT-UP Function Power Function Only models IRX… and IQXKeep warm function Models IRX… and IQX Safety disconnection Timer functionSetting the timer for one hotplate Using the clock as a Countdown chronometerSafety against overheating models IRX… and IQX Disconnecting the timerPower surges Suggestions and recommendationsRecommended Cleaning Products Cleaning and careCleaning and Caring for the Glass Light soilingUsing the scraper When the colour of the glass changesPage Cookware sticks to the glass GB If something doesnt workCooker doesnt work Message U400 and beeping soundInduction zones dont get hot After the cooker has been turned offProblem Possible cause Solution Control panel is lockedBedienungsanleitung Einbauumgebung EinbauAbb Verankerung Einbau in Untergestellte UmluftherdeNetzanschluss Technische Daten Technische AngabenAbmessungen und Eigenschaften Sensorbedienung Bedienung und PflegeMaßnahmen vor Inbetriebnahme Modelle IRX... und IQXEinschalten DES Kochfelds ModelleEinschalten DER Kochzonen Ausschalten Aller Kochzonen KindersicherungAusschalten Einzelner KOCHZO- NEN Sensorensperre TRX-ModelleEinschalten der Stopp-Funktion Stopp-Funktion IRX/IQX-ModelleVorübergehende Deaktivierung der Sicherheitsverriegelung Aufhebung der SicherheitsverriegelungEnergieverbrauch Zwei- und Dreikreis-Kochzonen TRX-ModelleKochtopferkennung nur IRX/IQX-Modelle Ankochautomatik Kochanstoß TabelleErinnerungsfunktion IRX/IQX-Modelle Leistungss Dauer der Ankochau Tufe Tomatik in SekundenÄnderung DER Leistung WÄH- Rend DER Ankochautomatik Warmhaltefunktion IRX/IQX-ModelleBeispiel Ausschalten DER ANKOCHAUTO- MatikMaximale Funktionsdauer Power-Funktion IRX/IQX-ModelleSicherheitsabschaltung MaximaleSicherheitsabschaltung BEI Bedeckung DER SENSORBEDIE- Nung Zeitschaltuhr TimerEinschalten der Zeitschaltuhr Überhitzungsschutz IRX/IQX-Modelle Hinweise und EmpfehlungenStoppuhr Verhalten bei ÜberspannungLeichte Verschmutzung Reinigung und PflegePflege DER Glaskeramik Starke VerschmutzungEmpfohlene Reinigungsmittel AchtungVerfärbungen der Glaskeramik MittelSondern benutzen Sie hierzu eine Pin Ge mit bloßen Händen zu entfernenZette oder ein spitzes Messer siehe Störungsbehebung Fehlermeldung U400 und SignaltonFehlermeldung ER 03 und Signalton Das Kochgeschirr bleibt an der Keramik haftenLüftergeräusch zu hören Die Induktionskochzonen erwärmen sich nichtReagiert nicht Programmiert wurde Llation auf Zung kommt
Top Page Image Contents