GB |
*The stainless steel should be washed in soapy water using a soft cloth. If the metal is yellowish after washing, we recommend that you use: lemon, vine- gar, dilute amonia or a cleaning product that contains dilute amonia.
*When cleaning the appliance with the burners removed, care should be taken not to allow liquid or other objects to get into the injector openings.
*When cleaning, do not use products that can harm aluminium, such as soda, oil, etc.
*The ignition unit (ceramic part and elec- trode) must be periodically cleaned with care in order to prevent ignition pro- blems. A check should also be made that the burner slots are not obstructed.
Note: Whenever you replace a burner, you should check that all of the parts are properly in place. A part that is not in the right place can cause poor com- bustion and/or overheating.
Maintaining the burners
Whenever the gas taps are removed, you should change the washer that is between the taps and the supply pipe. The burners are working properly when their flame is stable and a
In order to guarantee that the gas installa- tion is properly sealed and that the burners are working properly, the hob needs to be inspected by specialised Technical Service personnel at least once every 4 years.
Note: Any alteration or adjustment nee-
16
ded by the appliance should be made by authorised technical personnel.
Operation of models with 
electric hotplates
The electric hotplates are controlled by a switch with seven positions. To get diffe- rent levels of power, all you need to do is to turn the appropriate knob and set it to the position you want. On the control panel, areas are marked (A) that show (with a circle) the control for each hotplate.
fig. 7 |
‘Hotplate in operation’ indicator |
Control index |
The pan should be placed on the hotplate before ignition.
The power’ corresponding to each of the switch s positions is as follows: