If something doesn’t work | GB |
|
Before calling the Technical Service, please make the following checks:
FaultPossible cause
Neither the hotplates nor the pilot lights are working
The cable is not con-
Possible solution
Connect the cable
There is no spark when the
nected to the mains
to the mains
automatic ignitiion control is pressed
There is no current at
the plug
There is a spark but the burner does not ignite
The spark plug and the part
of the burner where the
spark should be is soiled or
greasy
The gas burners do not light
Check/repair the electri-
city at the mains
Clean the end of the spark plug and the burner
Gas is not coming through | Check that the gas | |
to the hob | cylinder tap is properly | |
open | ||
| ||
| If it is piped gas, open | |
| the gas tap | |
The burner ignites, however, when you release the knob | ||
activating the safety feature, it goes out again | Clean the burner’s | |
The flame does not appear | ||
in the area heated by the | openings | |
thermocouple |
| |
The gas burners are making the pans dirty |
| |
The burner openings | Clean the burner | |
are dirty | openings |
The injector or injector | Clean the | |
and injector without | ||
holder is dirty | ||
using anything which | ||
| ||
| could damage or alter | |
| the diameter of the gas | |
| outlet opening |
19