A |
Instructions for Removing the Supports and the Flat Catalytic Panels.
1 Remove the accessories from inside the oven.
2 Ease out the supports (A), releasing them from the bolt (B)
A | B |
|
3 Undo the bolt (B), which releases the flat catalytic panels.
4To disassemble the back panel (C), remove screw (D).
D |
C |
are worn, they must be used the other way round inside the oven with the new enamelled surface towards the inside of the oven.
Cleaning the Oven Exterior
and Accessories
Clean the outside of the oven and the accessories with warm soapy water or with a mild detergent.
Caution
Never use metallic scouring pads or |
|
commercial or scouring powders that could |
|
scratch the enamel. For stainless steel |
|
surfaces, proceed with care and only use |
|
sponges or cloths that cannot scratch them. | ENGLISH |
has to be first removed from the kitchen unit. | |
To clean the outside of the oven do not attempt |
|
to remove the controls, as for this, the oven |
|
3To remove the back panel (B), remove bolt
(C).
C |
B |
4 Proceed in reverse order to
B |
C |
5Proceed in reverse order to
Caution
The flat catalytic panels can be used both ways round, lengthening their life. When they
.
Cleaning the Oven Door
Depending on the oven model, you can remove the door to simplify its cleaning. To do so:
1Open the door.
2Completely turn the two clips (A).
A |
32
33