Tefal IS6300Z1 manual Is There a Problem ?, Problems Possible Solutions Causes

1103907432 DR5060 M1_105x148,5 25/04/14 16:00 Page8

IS THERE A PROBLEM ?

Problems	Possible	Solutions
	causes
There is no steam.	The steamer is not	Check that your appliance is
	plugged in.	correctly plugged in.
	The water level is too	Unplug your appliance and refill it.
	low.
	The steam button	Press the steam button
	has not been primed.	continuously for a few seconds to
		begin steaming.
	You use the	When the appliance is new, press
	appliance for the first	the steam button a few times.
	time.
	The water tank is not	Ensure that the water tank snaps
	in place.	in when put into place.
The appliance does	It is not plugged in.	Plug in your appliance.
not heat.
Water leaks or spits.	The water tank is not	Be sure that the water tank snaps
	in place.	when put into place.
	Your appliance is not	Allow your steam brush to heat
	hot enough.	for approximately 30 seconds
		before using.
	The dual voltage is	Ensure that the dual voltage
	not set correctly	selector is in correct voltage
		position before operating. Unplug
		the appliance and switch the
		selector to the correct voltage.
There is not enough	The dual voltage is	Ensure that the dual voltage
power or too much.	not set correctly.	selector is in correct voltage
		position before operating. Unplug
		the appliance and switch the
		selector to the correct voltage.

For any product problems or queries, please visit our website - www.rowenta.co.uk

or contact our Helpline on 0845 602 1454 - UK (01) 461 0390 - Ireland

Environment protection first !

Your appliance contains valuable materials which can be recovered or recycled.

‹Leave it at a civic waste disposal centre.

8