1103907432 DR5060 M1_105x148,5 25/04/14 16:00 Page7
• Remove the lint pad from the | EN | |
steam brush by pulling it to the | ||
| ||
bottom. |
|
•For storage, attach the lint pad to the steam brush by lining up the slots of the brush with the slots of the lint pad. Gently push the top of the lint pad into place until it snaps in - fig.11.
After use
Warning: never touch the steam head until it cools completely.
•Unplug the appliance. Empty the water remaining in the tank and leave unit on its side to cool.
After the appliance has cooled down, it may be stored in the bag provided (depending on model).
Warning: never forget to unplug the steam brush and empty the tank after your working session. While not in use, you can hang your steambrush by its hook.
7